Ratings & Reviews for Project Source 0.75-in x 25-ft Melamine Iron-on Veneer Edging
Ratings may include incentivized customer reviews.
What Customers Are Saying
The melamine iron-on edging tape is generally well-received, with customers finding it easy to apply and providing a clean, professional look. However, some users reported issues with the tape being too thin or narrow, and a few had problems with the glue bleeding through or damaging their iron. Overall, the product appears to work well when used as directed, but customers should carefully measure and ensure compatibility with their specific project before purchasing.
Customer review summary generated by AI, including incentivized reviews.Finishing Touches to Project
Would RecommendBuilding shelves to hold toys, my husband wanted to put the white veneer on the edges to give it a smooth and finished touch. He did a really good job on the whole setup.
Great product
Would Recommendsticks quickly. No need to purchase expensive cabinets . Just need iron.
melamine board edging
Would RecommendMade shelving for our utility room and used this iron on edging to make the cuts disappear! It is quite easy to apply, cut to length and place one edge in its location, heat it with the iron, let it cool a minute to hold it in place, now hold out the rest and iron into place.
Easy to use
Would RecommendVery easy to use and get professional looking results. Just iron it on straight and trim it flush with the edge.
Great Stuff
Would RecommendThis is a easy to use product that puts a nice finish on the raw edges of Melamine panels. I have a full sheet that I use for a desk based with 2 2-drawer file cabinets and added a smaller piece for extra space that wasn't finished on the edge. Took about 5 minutes total to finish the edge and you can't tell the difference from the ones that come finished.
Worked as advertised
Would RecommendThis was a quality tape that applied and has held well. I would not use again on 3/4 board because it just barely reached the edges, but fit my needs
Perfect match for the 3/4 partyicle board Melamine
Would RecommendI used the nominal 4x8 sheets of particle board to create some shelving and a water heater enclosure. This edging material easily applies (iron-on) to the exposed edge and matches the faces of the board perfectly. Now, if only they'd offer some little dots to cover drywall screw heads!
Quality Veneer
Would RecommendThis Is the second roll of edging veneer from Lowe’s that I’ve used. It’s consistently good throughout the roll. Adheres well and trims up cleanly. This review is for the melamine finish, but the birch finish was just as good and took stain well.