Ratings & Reviews for Project Source 0.75-in x 25-ft Melamine Iron-on Veneer Edging
Ratings may include incentivized customer reviews.
What Customers Are Saying
The melamine iron-on edging tape is generally well-received, with customers finding it easy to apply and providing a clean, professional look. However, some users reported issues with the tape being too thin or narrow, and a few had problems with the glue bleeding through or damaging their iron. Overall, the product appears to work well when used as directed, but customers should carefully measure and ensure compatibility with their specific project before purchasing.
Customer review summary generated by AI, including incentivized reviews.There Has to be Something Better
Would Not RecommendIroning this on left marks, even with the iron protected so…. I ended up using a heat gun with better results, especially if you have any curves in what you’re putting this edge on. Bottom line: There HAS TO BE something better out there.
Verified Purchaser
Size is not correct
This product is not 4.5” like advertised. It’s only 1/2” wide
Verified Purchaser
Fast, Easy, and a great Match
Would RecommendThis is some of the easiest edging to use. it matches the BlueHawk shelving perfectly. Make sure you use a good sharp blade to cut the edge you plan to edge band.
Verified Purchaser
Works great, use lots of heat.
Works great with the melamine board to make refrigerator end panels
Verified Purchaser
Super sexy melamine veneer banding!
Would RecommendLowes keeps asking me to review very generic products. This is no exception. It performed as it should. I have no complaints.
Verified Purchaser
It works OK, a bit thin.
Would RecommendI like the ability to iron it on. It's a bit touchy with the amount of heat. You have to get just the right amount of heat, then run the iron slowly over it multiple times. To little heat, it won't stick, too much, and it melts.