Ratings & Reviews for FastenMaster VersaClip Combination kit Black Hidden Deck Fastener 360 -Pack )

There is a different product made by the same company sold in a smaller container that sells for about the same price. These clips are hard to use and take too much time to install.

Probs the cheapest option for hidden fasteners

I’m on the fence on the number of stars to give these clips as it’s probably the best option for the money. I’ve done over 600 ft.² of deck using these clips and they’re doing what they’re supposed to do. Using hidden fasteners in and of itself takes a lot longer than normal screws. I agree with some of the other reviews that the screws are soft and strip fairly easily. To help counter the softness, I use a regular drill, NOT a compact drill. Line your bit parallel with the screw and take it ni...

Probably would not buy again

Pro's: I like the way the clips draw the board into the next boar, so there is a snug connection. Negatives: The screws are worthless. Half the screws get stripped while driving them in, so if you need to take one out, you will need pliers, hammer and or nail claw. There aren't enough end clips, so you will run out and will have to improvise by countersinking screws into the ends.

Not recommendrd

The screws are soft material and the drive pocket is to shallow causing them to strip easy

Disappointed

I purchased this system for a recent deck build and wanted hidden fasteners. After doing some research, i thought this system looked great. After spending an entire day, i felt i neeed to warn others. The design concept is great, but after using them, the design is terrible in my opinion. They take forever to install and if you’re by yourself, its even worse due to getting the board into the clips. Really takes a long time and an exhaustive amount of effort. Clips are cheap and bend/warp easily...

Simple

Simple to install. Just did my own deck. About 250 square feet. The box comes with starter clips that were nice near the house. finished the board install in a half a day. Worth the price for a stainless clip and screw!

Watch the YouTube Video!!

Once we watched the YouTube video it was easy! The deck looks great and I would recommend these clips. No screw heads showing and perfect gaps.

Terrible Quality

Rarely leave reviews but these things are so bad I feel like doing my part to let people know not to waste their money on these. They strip, warp and break so easily it's like they're made of butter. Wish I would've stopped mid project to start over and go with the regular Trex fasteners or tried out the camo. These thing are terrible.

Learn from my mistakes

I was pumped to use these with my Trex enhance deck boards that I was using to replace my wood deck boards with. I used them on a 10' by 12' grill deck. I found them hard to use partly because I was doing it alone. I was putting down 12 foot long boards. I found it was hard to engage the clips if the board wasn't perfectly straight.I would get one side in and while pushing in the other side the first side would pop out. I also found that the fasteners were easy to strip out the heads. After bein...

JUNK

Clips twist and cheap screws strip easily. Bought them for a project and quickly returned this garbage to Lowes.

Should be better for price

The clips work well and makes the hidden screw look good on my new trex deck. These are pricey and the screws themselves are cheaply made & strip easily. They Should use a star type end for less stripping of the screw heads. Composite decking should be 1ft on center beams instead of 16 inches like normal boards so this box doesn’t cover as much as what it says if you put a fastener on every beam, plus some screws are going to strip out. It’s an ok system & I haven’t seen much better but you are ...

Composite deck hidden fasteners

I used the Lowe's VersaClip hidden fastener for my composite decking installation and it worked very well with great results.

Trex deck fasteners

Absolutely a product that does NOT do the job. This is what you get when you buy the substitute for the real thing. I put two runs down with 16' TREX board and could get the clips to engage and clamp correctly. DONT WAIST YOUR TIME ON THESE. Buy the TREX fasteners and save yourself the time.

Screws are like putty

Screw heads strip, screws break in half, leaving no real anchor. Maybe the impact driver is too much.

Versa Clip

Easy to use like the fact that tasters are hidden and not going through Trex.

VersaClip Hidden Fasteners

Worked great, easy to install. Nice and professional looking!

They are easy to use,hold very well,price is good,

quantity per bucket is good. installation went smoothly.