Ratings & Reviews for Eaton 15 -Amp 3-speed Touch Fan Control White

Great!

This Eaton Fan Humidity control sensor is a really nice feature to have. The fan kicks on when it reaches your set level. It has 3 settings, low, medium, and high. Or, you can operate the fan manually just by pushing the fan button. Very easy to install. I would definitely recommend this to a friend.

Cool automation

This is absolutely one of the coolest products I have installed. I replaced the manual fan switch in the bathroom. The switch is just outside of the shower so it gets good exposure to the moist air. I set it to the lowest humidity setting available and when it needs to activate, it does so. My central air keeps the humidity pretty low, but a hot shower can activate the fan. I can also manually turn on the fan and walk away. The fan will shut off automatically.

Great humidity switch

Good fan timer pause easy to install. Doesn’t pick up the humidity in my bathroom very well but it’s probably just because our bathroom so big I like that it turns off on its own

Modern design, easy install

So far, so good. Installation was a little bit of a challenge, but not because of the product. Trying to tie this switch in with three others wasn’t too hard. Programming was very simple. I have mine set to a level 3 to test it out. Level 3 is 45% humidity. The switch fits well with other modern switches and blends in with my existing ones.

Indoor Use Fan Control/ Humidity Sensor

Modern appearance makes this fan contol and humidity sensor a success. Installation instructions proved well written and so easy to follow. I like that the sensor is intended to save electricity. The humidity sensor comes set to medium humidity but can be adjusted to low and high humidity too if desired. The two year warranty is a definite plus.

Functional auto-switch for a high humidity room

A very nice product, designed to keep humidity at bay. This switch works well to allow ventilation to a humid area automatically. The switch has three humidity settings High 85%, Medium 65% and low 45%, these settings are programmable with ease using the on off button without removing or opening the switch. The switch has four wires to connect one for the load (the fan side of the switch), one for HOT (black), one for Neutral (White) and the forth one for ground (Green) All including the Neutral...

Check your wiring before buying

I was really looking forward to having this switch in the bathroom. It seemed like a great idea. I wouldn't have to rely on kids to remember to turn the fan on when using the shower would be great! I have an old house but I assumed the current bathroom fan switch was grounded since it's a fairly new item (not 100 years old like the house) so didn't check. It wasn't. I can't install the switch without finding a way to run a ground wire to the box which would involve opening up old plaster wa...

Easy installation

The installation instructions were clear and easy to understand along with color coding of each wire. The programing directions were a little complicated but was able to accomplish and set it up for our situation.

Auto shut off

I'm a fan of automatic sensors and other smart things for the home so I was eager to give this a try. The installation was relatively simple. I did have to call a friend to solve a wiring question since I only have very basic electrical knowledge. It works as intended. The best feature in my mind is the auto shut off. I felt the instructions were vague when explaining about the humidity levels. After playing around with it awhile, I'm happy with the result. It looks good, blends well and does no...

Cool switch!

This switch is low profile, great looking and best of all, easy to install. It took less than 30 minutes to install and program to my preferences. I had my reservations how effective and useful this automatic humidity fan sensor would work. I set it to the lowest humidity level that it would activate. I tested it by turning on the shower on hot and closed the door. It was installed in a guest bath about 80 SF. To my surprise, about a minute later I went to check and the fan was alread...

Functions as described.

This fan switch works, but I couldn’t get it to work for me. It’s easy to install, fitting right in where the old rocker switch had been. It doesn’t look bad. Programming is simple. It starts and stops the fan with a single button push. As a timed fan switch, it does its job. You can push the button to start it and walk away. It’s built to turn the fan off after 20 minutes and it does. If you don’t want it run that long, you can always push the button and shut it off. The problem I had was...

It's your shower's friend.

You can adjust the humidity level and one time without having to take it apart. The manual switch is nice to the touch. I can't say about accuracy. Installation is difficult because the unit is bulky and one has to rearrange the wiring in the box to squeeze it in. It takes up about 80% of the space directly behind the switch. But all these humidistats are like this. Overall really pleased with it!

Great exhaust fan switch.

This switch is great for a small bathroom with high humidity. I do advise that you have a professional electrician install the switch, mainly for your safety. It usually takes about twenty minutes for the install. You do have a manual switch along with the automatic so you are able to use it with lower humidity.

Great switch

Great switch so easy to install.just 4 wires.just twist and use wire nuts.place in wall put cover on and ready to use.very good for average bathroom.white I n color

Intelligently control that bathroom fan!

If you have a fan in the bathroom, it is almost always either on when it shouldn't be or not on when it should be. This humidity sensor switch works almost automagically. It is even worth it for just the auto off feature if you manually turn on the fan to vent odor. Now the fan goes off when it is manually turned on and it automatically starts up when the humidity is at one of three programable levels. I liked it so much I did the guest toilet just for the auto off feature.

Very Handy

I really like this humidity sensor switch! I was fairly difficult to install in my situation. I have a combo light, heater and fan in one unit. It took awhile to figure out which wires go together. Once I did that, this works great. Comes on shortly after turning the shower on and has a twenty minute timer to shut off automatically. You can also turn it on with a push of the button. It will turn off automatically when doing that also. Never forget to turn the fan on or off again. I like that.

Humidity

Humidity sensor with fan controller all in one. Great product to turn on and off fans at preset Humidity levels. Has a button for manual control as well. Good for any high Humidity areas.

Decent

The idea is great. I no longer have to worry about leaving the fan running all day. The installation was easy and pretty standard. The operating instructions weren’t very clear IMO. Those instructions explaining everything could’ve been better. Not the most complicated device though. One issue is it seems too sensitive. Even on the highest setting it comes on almost immediately. Even times when it’s just a person in there and no shower going. I may need to adjust it. Ive tried the different sett...

Bathroom Fans with an Off Timer are Essential!

If you have children you will know that Bathroom Fans with an off timer switch are essential! This saves you from the headache of remembering to turn off the bathroom fan. Also saves electricity and the annoying sound if you have a loud fan! The install was extremely simple as long as you have a neutral wire in the box. The fan will go off on its own after 20 minutes of pressing the on button. The auto on humidity sensor part doesnt work as perfect as i would like or i would have given this revi...

Works great

Love it! I ended up not programming it but I turn on when I enter the shower and it senses when it needs to shut off. It has a nice sleek desiyand easy to install.