Ratings & Reviews for Tapcon 1/2-in x 10-in Carbide Masonry Drill Bit For Hammer drill
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise this drill bit for cutting through concrete and brick with ease, particularly for Tapcon screws and anchor installations. Most report excellent durability and sustained sharpness, especially when paired with a hammer drill. Many highlight its superior performance compared to competing brands and its ability to drill multiple holes cleanly without overheating. Some customers experienced premature dulling after just a few holes or occasional bending, typically when using standard drills or drilling into exceptionally hard concrete. Overall, reviewers strongly recommend it for masonry work when used with proper equipment.
Customer review summary generated by AI, including incentivized reviews.Good, strong drill bit
Would RecommendAfter it rained water would pool on my Lanai along the border of the bird cage. I needed a good, long, masonry drill bit to drill drain holes along this border. This carbide masonry drill bit did the trick and made short work of the drilling project.
From 3_SLASH_8-in x 8-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Works great on tile and concrete
Would RecommendI burned a couple other brand bits trying to drill 1.5" holes for anchors in concrete and through tile. In a 1/2" hammer drill (not even an SDS) this chewed right through the job. A total of 15 holes for Tapcon screws and all I had to do was let it cool between runs.
Great Cement Drill Bit
Would RecommendDrill through cement very easily.
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Not for concrete
Would Not RecommendIt works on bricks but it simply does not work on concrete slabs although its description says so otherwise; it barely drilled in 1" of 4" a concrete slab.
1
Would Recommendworked I should
From 5_SLASH_32-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Figure what needs to be done, get the materials
Would RecommendI had to install some 4” square posts up against a cinder block wall. The posts did not carry any substantial weight. Using a wood drill bit; I pre drilled the holes in the posts. I Leveled the posts to the cinder block wall; Used this cap con Drill bit in the pre drilled holes and drilled into the cinder blocks. I needed the length to be able to reach the wall.
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Concrete drill
Would RecommendWorked great
From 3_SLASH_8-in x 8-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
concrete bit
Would RecommendEasy to use
From 3_SLASH_8-in x 8-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
it is good
Would RecommendThis drill worked fine in old concrete
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Drilled 25 holes easily
Would RecommendWell made bit
Verified Purchaser
Good product just wish they were an inch longer
Strong bit. I dont have to replace very often
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Pricy Bit
Would Not RecommendThe first 2-3 holes it works great. Then it must get dull and you have to get a new bit.
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Drill bit
Would RecommendUsed this bit to drill 75 holes for anchors and was still drilling great
Verified Purchaser
DO NOT BUY.
Would Not RecommendWasn't even able to make 2 holes with it. Dulled Quickly and blued like it overheated. Had to finish with a cheap Harbor Freight bit that worked better. And is still in my box for another use.
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Good
Would RecommendNice and good product. Works as well , easy to install.
Verified Purchaser