Tapcon 5/32-in x 7-in Carbide Masonry Drill Bit For Hammer drill
Item #315907 |
Model #11492
Engineered for use with Tapcon and RedHead anchors
Designed for the toughest concrete and masonry drilling jobs
Carbide tip increases strength and durability allowing for repeated use
Tight bit tolerance provides maximum anchor performance
Manufactured with higher tolerances than ANSI standards
An accurate fit so anchors install quick and last long
Precise holes in order to achieve maximum holding power
Increased drive and holding power when used with Tapcon anchors
Less breakage on the job
General | |||
|---|---|---|---|
Type | Rotary | Case Type | N/A (no case) |
Material | Carbide | Shank Type | SDS-plus |
Package Quantity | 1 | Tip Material | Carbide |
Dimensions | |||
|---|---|---|---|
Bit Diameter (Inches) | 5/32-in | Maximum Drilling Depth | 5-in |
Bit Length | 7-in | Shank Size | SDS-plus |
Features | |||
|---|---|---|---|
Set/Individual | Individual | ||
Compatibility | |||
|---|---|---|---|
Brand/Model Compatibility | Tapcon Red Head | For Use on Concrete | Yes |
Compatible Tool | Hammer drill | For Use on Brick | Yes |
For Use on Stone | No | For Use on Tile | No |
For Use on Wood | No | For Use on Rebar | No |
Warranty | |||
|---|---|---|---|
Warranty | None | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 27111500 | ||
Check out the Best Selling Masonry Drill Bits on Lowes.com
Ratings may include incentivized customer reviews.
What Customers Are Saying
The drill bits are generally effective for drilling into concrete, brick, and other masonry materials. Key strengths include durability, precision, and efficiency, especially when used with a hammer drill. However, some users reported the bits dulling or bending too quickly, particularly when drilling very dense or thick concrete. Additionally, a few customers experienced issues with the bits not fitting properly in their drill chucks.
Customer review summary generated by AI, including incentivized reviews.Bit brakes easy
Bought this for cement block and 2 snapped so easy not even putting pressure on the sds .
Concrete drill bit
Product work wonderfully
Hi there, thanks for sharing your positive experience with our Drill Bits. We work hard to make sure our products are well designed. We’d love to hav...
Dulls out too fast
used the bit to drill less than 10 holes and by hole 8 it was too dull to drill into concrete. Would not recommend
Hi there, thank you for sharing your feedback. We are sorry to hear that your experience with our Drill Bits did not match your expectations and did ...
Poor Quality
Dulls to fast
From 1_SLASH_2-in x 10-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Excellent drill bit for the wall anchors I used
Worked like a charm
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Hi there, thanks for sharing your positive experience with our Drill Bits. We work hard to make sure our products are well designed. We’d love to hav...
Cuts like butter
This bit is tough! It cut really, really nice
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Hi there, thanks for sharing your positive experience with our Drill Bits. We work hard to make sure our products are well designed. We’d love to hav...
10 Questions
2
Answers
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
1
Answer
Is this bit for the 1/2" tapcons
Anonymous on October 11, 20200
Answers
Can I get a bit to drill into metal for a SDS Bosch hammer drill?
Anonymous on September 6, 20200
Answers
is this a good bit for drilling into ceramic bathroom wall tile
Anonymous on November 22, 20180
Answers
Hi there, thank you for sharing your feedback. We are sorry to hear that your experience with our Drill Bits did not match your expectations and did ...