Ratings & Reviews for Tapcon 1/2-in x 10-in Carbide Masonry Drill Bit For Hammer drill
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise this drill bit for cutting through concrete and brick with ease, particularly for Tapcon screws and anchor installations. Most report excellent durability and sustained sharpness, especially when paired with a hammer drill. Many highlight its superior performance compared to competing brands and its ability to drill multiple holes cleanly without overheating. Some customers experienced premature dulling after just a few holes or occasional bending, typically when using standard drills or drilling into exceptionally hard concrete. Overall, reviewers strongly recommend it for masonry work when used with proper equipment.
Customer review summary generated by AI, including incentivized reviews.Excellent bit
Would RecommendExcellent bit a must if you want to install your tapcon screws correctly with a sds hammer drill
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Sturdy bit
Would RecommendThis bit is far more durable than what comes in the box with Tapcon screws. It is also long enough to drill through a 2x and far enough into the concrete in one pass in order to sink a 4 inch tapcon.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Works best with a hammer drill
Would RecommendPerfect bit to accomplish the job. Coundkt have gotten it done without it
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Use a Bosch bit, or consider another anchoring sys
Would Not RecommendThe Tapcon drill bit bent while using my sds plus drill. I don't believe I abused this bit. I purchased a Bosch bit afterwards and it worked fine. Since the bit bent, it increased the diameter of the hole and now the Tapcon screw didn't fit tight enough to hold. It was a complete mess. I won't use the Tapcon system again.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Did not stay sharp long
Would Not RecommendAfter drilling the 3rd hole, the bit was very dull
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserVerified Pro Incentivized
Good for concrete or brick
This bit worked great for drilling into concrete, got the job done and everyone was happy.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Expensive but worth it
Would RecommendVery durable and consistent. These are pricey, but hold up very well for repetitive drilling.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Quality product
Would RecommendThese bits are great in my rotary hammer drill and can even be used in my hammer drill.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Solid purchase
Would RecommendI purchased this bit for use with tapcon screws in reinforced concrete. The quad tip burns through concrete and lasts for months if used properly.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
A nice bit of kit
Would RecommendA nice still bit. Yup it’s a drill bit, very hard and pointy. Did the job well
From 3_SLASH_8-in x 8-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Did great, will buy more!
Would RecommendDrilled in with regular or hammer drill no problem.
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Did the job well
Would RecommendDrill bit did a great job with hammer drill & regular drill. Only used 5x so unsure of longevity yet. Good so far
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
I would buy this brand again
The attachment seem to work very good went through the concrete pretty easy
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized