Ratings & Reviews for SpeedOut 2 -Pack Steel Double-Ended 2-in Screw extractor

Works as advertised

Needed to pull out several stripped out #10 screws and as long as you follow the instructions, these worked perfectly. Took no effort at all to get them out. Highly recommended. (just remember to keep your drill in reverse for both procedures)

Not frustrated anymore

Spent a couple of wasted hours trying to remove a striped screw trying all sorts of thing around the garage then I went to Lowes an lurched this item came back home one quick try an voila screw came right out no more frustration

Amazing

Stripped 3 screws on my 70 inch tv stand, I wanted to remove to hang on the wall. I tried the rubber band trick, the duck tape trick nothing worked. Saw this and thought it was t going to work after removing 1 stripped screw I already know whoever didn't give it 5 stars obviously has no clue what they're doing.

Worked like a charm

Worked like a charm on a screw that I stripped trying to get a cover off of a shower floor drain. I went out and got this little product only to find out that I don't have a drill that reverses. Luckily the bit fit right into my Black and Decker cordless screwdriver that does reverse and the slower torque actually helped better than a powerful drill. This little device took the screw out in about a minute.

Sometimes works, sometimes does not

Got this to help with disassembling of an old structure made out of pressure treated lumber and corresponding screws that was covered in soil. Some of the screw heads rusted out. I had about 50% success rate to get out stripped screws.

Excellent but tricky and needs a labeled box

This is a very good product but read the instructions. This does NOT work like most screw extractor sets. Typically, a set will include a drill bit that is driven in the "Forward" direction to drill a pilot hole. Then the extractor will be hammered into the pilot hole and a wrench will be used to grab the extractor and turn in a counter clockwise direction. That is, there is no drill used to actually remove the screw. This product works but is different. Both ends are used in the drill. And bot...

Grabit screw remover

Junk, save your money, junk, doesn't work. returned this one too.

Doesn't Grabit

Out of approximately 20 different screws, this thing could only remove one. Don't buy it. It's a waste of money!

Stuck on car rotors...

I bought these bits after trying every trick I knew to remove the retaining screws from a set of rusted brake rotors. I was amazed at how quickly and efficiently this worked. Drill out with one side of the bit, and unscrew with the other. Absolutely brilliant! Saved me hours of pain. I agree with the other commenter who suggested using a wrench to torque the exposed bit to help with the initial breaking of the rust. Couldn't be more happy with my purchase.

Worthless

Bore a hole in the screw, put the extractor in and it just spun around. It can't grip anything in the hole. Consider this a donation to Lowe's.

Good product

The Grabit was helpful when I stripped a screw while installing wire shelving. The tool worked great to remove the screw and I was able to replace the screw and finish the job. I also had several deck screws that were rusted out that this tool allowed me to remove the screw and replace the boards easily.

Work 100% As Advertised

I am not mechanically or handyman-inclined at all. That being said, when a screw stripped while trying on my own to replace and upgrade my kitchen sink (mistake #1 lol), I had ZERO confidence that I would be able to get myself out of this mess without having to hire a plumber to get the screw out. But With a little help from Google and ultimately deciding on this product, I followed the directions in the package and had the stripped screw removed in under 10 minutes. Honestly, I was SHOCKED that...

Didn't work as advertised

This product did not work as advertised. I had to go to Sears and buy a kit for twice the price to get the job done. I returned this kit to Lowe's.

Works as described

Not much to say here. Had a stripped out allen screw that would not come out with the wrench. Installed the tool into the drill and out it came.

good tool to have

I had a few screws that were striped. I needed to get them out. Someone told me about a tool that can do the job. It took a little bit of time but it works. I would recommend this .

Best Screw Remover I've Tried

This thing really works. Follow the directions, and this thing (2 bits included) will save a lot of time and aggravation. I tried other brands, and thought for the price I'll give it a try. You won't be sorry, and just remember to use reverse for both ends of the bit. Also, go real easy when you back out the damaged one.

Easy, quick

I was surprised at how easy it was to use. It was a small screw that was recessed and stripped. Came right out.

Complete Waste of Money

No bigger waste of 13 dollars available on the market today. If you want to take a partially stripped screw head and completely strip it so you'll never be able to remove it, then by all means buy this product. Otherwise save your money.