Ratings & Reviews for Project Source 0.75-in x 25-ft Birch Iron-on Veneer Edging
Ratings may include incentivized customer reviews.
What Customers Are Saying
The veneer edging product appears to be an effective and easy-to-use solution for covering plywood edges. Customers report that it is simple to apply using an iron, adheres well, and can be easily trimmed and stained to match the plywood, giving a professional, finished look. The key benefits include strong adhesion, the ability to stain and finish the edging, and the transformation of plywood to look like solid wood. While a few customers had issues with adhesion or the roll being stuck together, the overall sentiment is very positive.
Customer review summary generated by AI, including incentivized reviews.Birch edge banding was all stuck to itself in the.
This edge banding was already glued to itself and it took me an hour just to get 5 usable feet from the 25’ on the roll!! 😡 I had already purchased 2 rolls previously, which worked fine, and I went back for one more roll, which was a different manufacturer or at least was in different packaging. It was very frustrating using this product and I won’t buy it there again.
Verified Purchaser
Good but has a flaw
Would RecommendGreat product, adheres well when ironed on, but it did not take up the stain. Even after I sanded it down to roughen up its surface. I had to buy and used furniture scratch covering pen/markers.
Verified Purchaser
Edging review
Would Not RecommendIt crumbles apart upon unwinding and the surface is bumpy - not smooth.
Verified Purchaser
Great product! Easy to use.
Would RecommendEasy to use.. Lots of adhesive and plenty thick enough.
Verified Purchaser
Caveat emptor
Would Not RecommendThis is not a very good product. It splinters when you trim the excess but the worst problem is the jagged splices in the roll. Staining doesn't hide it, it highlights the defect. I wasted several feet to avoid having this blemish on my project.
Great Veneer
This worked really well. However the tape that was used to keep it from unraveling must have been old because it was hard to remove and when I did get it off, it left glue on the veneer that was difficult to remove, so I had to scrap about 6". Other than that it works great.
Verified Purchaser
Easy to work with.
Would RecommendEasy to work with, ironed on the edge of the plywood, and was easy to match with the stain.
Verified Purchaser
Works great
Would RecommendWorks great. Easy to use. Just make sure your wife knows how you are using her iron.
Verified Purchaser
Iron on veneer
Would RecommendGood quality, east to apply
Verified Purchaser
It works
Would RecommendVerified Purchaser
Has finger joints in it. Garbage
Would Not RecommendI used this product a couple decades ago and it was good. Now the rolls all have finger joints and look terrible. First roll had them every 18", I opened a bunch in the store and they all had them. I won't be buying this again. See photo.
works great and very easy
Would RecommendVerified Purchaser
could not use
Would Not RecommendI could not unwind the veneer as the glue transferred to the surface. I carefully tried to unroll the product but it kept breaking as it was all glued to itself, it was either old stock or it was exposed to high heat in storage. Will be returning product for refund.
Turns your plywood built into a great looking wood
Would RecommendIf the width was reduceable by 1/10th of an inch but that's asking too much
Verified Purchaser