Ratings & Reviews for FastenMaster VersaClip Combination kit Black Hidden Deck Fastener 50 Linear feet ( 90 -Pack )
Ratings may include incentivized customer reviews.
What Customers Are Saying
The hidden deck fasteners provide a clean, seamless look and help maintain consistent board spacing. The clips are generally well-made and durable, but the included screws are often reported as too soft and prone to stripping or breaking, making installation challenging. Proper alignment of the clips on uneven joists can also be difficult. While an effective hidden fastener solution, the poor quality of the screws is a significant drawback.
Customer review summary generated by AI, including incentivized reviews.Great
Would RecommendWere easy to install and were very sturdy when walking
Verified Purchaser
Nice and hidden away when used.
Would RecommendI like how these are hidden once you install them. You need to make sure your boards have the slot in the side to use them.
Verified Purchaser
Look great but not the easiest to install
Would RecommendA little difficult to get screw to start, several screw heads broke off, and easy to strip, should be a little more robust.
Verified Purchaser
Make sure it works for the decking you have
Would RecommendThey didn’t work for my decking that well . I have square edges and they are for round edges
Verified Purchaser
W
Was not up to the standard of the TimberTech version of clip. Seemed cheap
Verified Purchaser
Thank you for your review. We also make the ConceaLoc clip for Timbertech. The only difference between the two clips is that the ConceaLoc is designe...
garbage
Screws are soft; they strip and snap easily. I dont have a lot of confidence int these clips lasting long with settling and wear and tear…
Thank you for your review. Please contact Fasten Master at 800-518-3569 or techsupport@fastenmaster.com so we can understand why you had difficul...
Works great on Timbertech composite decking
Would RecommendWe were installing Timbertech composite decking and ran out of Concealoc clips on a Sunday! Found these which were so similar we were able to finish the job. Excellent clips that worked perfectly w Timbertech.
Weak Head
Would Not RecommendYou have to set up your drill torque on the lower end enough to drive the screws to your joist otherwise you will shear off the head.
Verified Purchaser
Thank you for your review and comment. We agree with your comment. The screws are stainless steel, it is a soft metal. So if you overdrive them, you ...
Thank you for your review. We're sorry to hear that our VersaClip did not work out for you. What board are you using? Please give us a call so we...