Ratings & Reviews for Deck Plus #10 x 2-1/2-in Composite Deck Screws 375 -Per Box
Ratings may include incentivized customer reviews.
What Customers Are Saying
The product received mixed reviews, with some customers finding the screws suitable for their composite decking, while the majority reported significant quality and performance issues. The main problems included the screw heads stripping out easily, requiring excessive force to start, and causing cracking or damage to the decking material, especially during removal. The inconsistent quality across batches was also a concern. Overall, the high rate of screw heads stripping out and the difficulty in installation and removal made this an unreliable product choice, and customers were advised to explore alternative screw options.
Customer review summary generated by AI, including incentivized reviews.Strip city
Would Not RecommendDoesnt matter what bit you use, they strip. Sucks I bought a 500 pack..
Sturdy! Great
Would Not RecommendGreat product! I had to replace some boards Matched perfectly!
Verified Purchaser
Good but not great
Would RecommendGood but not great. 1) Don't believe the lie that you don't have to drill pilot holes. You MUST or you will spend most of the day trying to get the screws in and have a bunch of scratches on your new boards. 2) Make sure you have a power tool with lots of torque to get the screws in. 3) DON'T TRY TO BACK THE SCREWS OUT, especially if you drive them in to far. Because of the "reverse thread" on the screws they will cause the board to raise up and you'll have a hell of a time getting the screws o...
Verified Purchaser
Hello, Thank you for providing us feedback on your product experience. We apologize that the product did not perform to your expectations and we will...
Still Need pilot holes
Would Not RecommendThey did not drill into the composite. I still needed to drill pilot holes.
Verified Purchaser
Hello Alan, Thank you for providing us feedback on your product experience. We apologize for the inconvenience and appreciate you bringing this issue...
worst nails
Would Not RecommendThe heads strip, and the only way to remove them if is to cut the screws. I wouldnt recommend these screws, waste of time. Look elsewhere.
Hello, Thank you for providing us with information on your product experience. We apologize that the product did not perform to your expectations and...
Screws strip out
Would Not RecommendHave used this product before. However this particular batch no matter which T20 bit I used the majority of screws stripped out. Seems to be a quality control issue
Hello, Thank you for providing us feedback on your product experience. We will continue to monitor product performance for quality control. Please kn...
Hello, Thank you for providing us with information on your product experience. We apologize that the product did not perform to your expectations and...