Ratings & Reviews for Bondo Clear Interior/Exterior Fiberglass resin repair 28.7 Fluid ounce(s)
Ratings may include incentivized customer reviews.
What Customers Are Saying
This fiberglass resin product has mixed reviews. Some customers reported issues with the resin not curing or hardening properly, even when following instructions. Others mentioned the resin becoming tacky and gumming up sandpaper, or running and ruining surrounding surfaces. However, many customers who properly prepared the surfaces and mixed the resin and hardener according to instructions had successful results, finding the resin easy to work with and producing strong, durable repairs. Overall, this product requires careful attention to mixing and application to achieve the desired results, but can be an effective fiberglass repair solution when used correctly.
Customer review summary generated by AI, including incentivized reviews.Used on my fiberglass ladder
Would RecommendJust applied this to a 5 year old fiber glass ladder. No patches just the application, and it took away the squeaking. The ladder no longer flexes. It has strengthened it again.
Sweepstakes
Fiberglass
Would RecommendWas exactly what I needed for some fiberglass repair work. Reasonably priced and just the right quantity. Easy to work with.
Verified PurchaserSweepstakes
Works
Would RecommendUsed to reinforce damaged dresser draw. Placed on bottom so not visible when used.
Verified PurchaserSweepstakes
works good
Would Recommendthis worked great for a heater box in a car it was chep plastic,and this fiberglass ,made a nice and stronger repair cant tell it was mended
Verified PurchaserSweepstakes
Used it to fix surf board
Would RecommendI bought resin hardener only to find out this comes with some, its in the top
Verified PurchaserSweepstakes
Good product
Would RecommendEasy to use. hard to measure out the correct ratio of hardening agent to resin. Holds strong
Verified PurchaserSweepstakes
Excellent product
Used it to re- coat a fiberglass tank. Easy to use
Verified PurchaserSweepstakes
A great all-around polyester resin.
Would RecommendIf you really need great adhesion to smoother surfaces, I'd suggest epoxy resin. But if you can rough-up the surfaces, are working over old fiberglass or previous layers, this stuff is great. Measure the hardener carefully and adjust the quantity to your application. I mix 4-6 oz resin with 8-9 drops hardener at 80-90 degrees F and it begins to gel in about 15 minutes. I'm building water tanks for a RV van project. I'm using this resin with cloth and mat to attach and seal FRP sheets.
From 3m.com
Good quality stuff
Would RecommendI work a lot with car audio, and fabricating different panels and enclosures inside vehicles. While not the cheapest option out there for this application, it definitely gets the job done. Easy to work with when you mix it correctly with included hardener, and is consistently strong when coupled with a fiberous material or fiberglass cloth/strand. Easily sanded after a few hours. Good for large projects like mine or small fixes.
Verified PurchaserSweepstakes
Fiberglass resin
Would RecommendResin was easy to mix and apply. It dried and hardened fast. Holding up well since application.
Verified PurchaserSweepstakes
Great product!
Would RecommendAwesome product, easy to use!
Verified PurchaserSweepstakes