Ratings & Reviews for Inte-Grates 4-in x 10-in 1-way Polystyrene Black Floor Register

Cool

This air vent looks really cool. It is really easy to install and oooks great when it is finished. I would definitely use these again. My only down on them is that they seem like they would break easy if anybody stepped on them.

Inte Grates 4 x 12 drop in floor register

The is a classy solution for what typically is an eye sore. This drop in grate fits nicely in an existing register of the same size. It also comes with a template for cutting in a new register. There is a space to hold a piece of matching flooring which really finishes the installation nicely and with a unique look. Everyone keeps asking us where we purchased this.

Next generation floor register

An unusual floor register with a secondary goal of blending in with the flooring. It also represents an interesting design that pushes the air to each side instead of straight up in the air. I like it though I wonder if it will withstand handling or a tight fit as it is plastic. Works for me so far.

Great floor vent concept.

The concept for this product is outstanding. I did not, however, say what the insert would be, i.e., 1x3 or floor tile or??? I used the composite flooring already in the room, but had to be "packed" out for it to be flush with the floor.

Looks great and good value

This is a good value register that can be customized to match your floor and looks like a much more expensive one. It comes with good instructions and a template for cutting your floor material to fit the inset. It's made well but it is plastic. It feels a little cheap out of the box but once it's installed it looks good and you'd never know it was plastic. I don't think it would hold up well if it was for a register that had heavy traffic like people stepping on it, but that's a rare situat...

Disappointing

Was a cool concept. Liked the idea and look on the box. Thought it would be nice to change the existing basic grates but the actual product was a bit of a let down. Being all plastic wasn’t a great design choice. Doesn’t feel solid or quality either and adjusting the air flow is a bit cumbersome. You also need a piece of your old flooring to cut the insert out of. Not sure what I was expecting but it wasn’t this. Install is easy, just drop it in and cut the insert. They give a template to make ...

Interesting new install

This is definitely a new way to install a floor vent grate. The install is super easy, I popped the old one out and dropped the new one in. The only other thing to do afterwards is trim a little bit of your existing flooring and place in the center tray. The vent is adjustable for flow or to completely stop the air flow if needed. The only minor issue to keep in mind, it’s totally plastic so hopefully it will last awhile but with that being said… it sure won’t rust like many vents end up doing.

Good for the price

Good product for the price. I have seen other vents like this online that are a lot more expensive. This one is made of plastic so they can get away with making it a little cheaper. They give you a template for the vent hole and the insert, so you don't need to worry about trying to get the absolute correct measurement. The tab to adjust the airflow feels like it could have been designed better, I feel like I am going to snap it. I went back and forth 10 times and it hold up though. Most people ...

Customizable Drop In Register

Floor registers are not something most people put that much thought into, but they're in most rooms of your house. It's nice to have an alternative to the boring metal basic register covers. These InteGrates are a nice way to add a little something extra to make the register look much more finished. They are a sturdy plastic (I know, I know ... You're thinking Plastic??? ... But it is solid, like nice, and isn't going to scratch up with the vacuum cleaner like metal). The register comes with as...

Floor Register

Very simple set up and installation. Simply cut the flooring to size and insert into the floor. Pull the old register from the vent and set new register into place. There is a lever that can open and close the register to stop or allow air flow.

It has some promise

The floor grate appears to be decently made. I was not real impressed with the cutout guide. While it does list measurements, the measurements they give are in decimals, ones you cannot translate to a tape measure. This to me is pointless, how are you going to measure your piece of flooring with a decimal value that doesn't round to a fraction? The installation itself was easy enough, just dropped the grate in the floor opening and away you go. The damper is easy to operate, the control for it ...

Excellent look for your floor

Nice cover for your hardwood floor. We have not used it yet due to still installing the floor but instructions are very clear and very easy to use as it will be hidden on the floor top.

Modern looking Vent

At first i was not sure I would like this, but after i added the matching flooring, it came out beautifully looks so much better then the old style, and easy to adjust airflow. Only draw back I can see is it is plastic so time will tell how it will hold up.

Very Modern/Sleek Register

I love this floor register! I've always hated the way vents seem to stick out like a sore thumb. But this vent looks awesome! You barely even realize that it's a vent! I added a piece of leftover flooring and it blends right in! It has the adjustable air flow which is great. I was concerned that the air flow would be somewhat restricted, but that doesn't seem to be an issue so far. It is plastic instead of metal, but it seems durable and I expect it will last a long time.

4"by10" 1 way Ploystyrene floor register.

This is a durable design. Beautiful in its simplicity and use. It was so easy to install then just add matching floor covering. From start to funish was about 10 minutes so several could be done in one day.

2X 12 -- 1 way adjustable black floor register

This 2 X12 Polystyrene floor register is a great idea. It is meant to be put in your wooden floor to match your wood style. We didn't have wood where we wanted this, but it did match our wood molding, it still looked good. Don't have to worry about it rusting like the steel vents. Fully adjustable with a sliding lever.

Vent Register

This register looks ok from the top, but it is very light duty and not usable for my needs. The louvers cover most of the outlet area and do not let enough flow into the room.

4-in x 10-in1-way Polystyrene Black Floor Register

I am not a fan of this vent at all the middle where the wood goes is to tall and even after you put the flooring in there its taller than the floor so it is a trip hazard, if that was not so tall it would be awesome do tot the fact it is well made and durable but the middle is way to tall in my opinion. I would not purchase this product again.

What a great concept

What a great concept to replace grates that stand out on your flooring to something that actually blends in. These give your flooring a custom look. I would definitely recommend this product to update your home.

Well Engineered Floor Heat Vent Register

I placed this heavy duty plastic vent register in the laundry room where there is a lot of traffic. The vent is basically in the middle of the floor and gets stepped on frequently. It is sturdy enough to hold up well. Other metal and plastic vents that I have had there get bent because they aren’t designed for the foot traffic. This vent will hold up better than the others.