Ratings & Reviews for GREAT STUFF PRO Foam Cleaner 12-oz Spray gun Indoor/Outdoor Spray Foam Insulation Canister
Ratings may include incentivized customer reviews.
What Customers Are Saying
The product is effective at dissolving and removing uncured foam from the gun, keeping it in good working condition. Many reviewers consider it a must-have accessory to prevent the gun from getting clogged and ensure it is ready for reuse. The cleaner works quickly and thoroughly, including on the nozzle and internal components. It is important to use the cleaner immediately after use to prevent the foam from hardening and causing damage. The included spray nozzle makes it easy to clean both the inside and outside of the gun. While a few felt the cleaner was overpriced, most agreed it was worth the cost to protect their investment in the foam gun.
Customer review summary generated by AI, including incentivized reviews.Easy cleaner
Would RecommendThis cleaner is a must when using the spray foam gun. It quickly and easily cleans excess foam out of the gun.
Works Great
Would RecommendJust screw it to the gun and press the trigger not much harder than that to clean the gun.
Great all around cleaner
Would RecommendThis product works extremely well. It is basically nail polish remover in a spray can and has many other uses around the shop. It's main use is to clean the Great Stuff application gun (Great Stuff Pro 14 gun). Attaching the product to the gun was easy and it cleaned up the gun itself and the connection port. It also cleans the partially used can top so it is ready for future use if removed from the gun. It can also be used to remove excess "super glue" and gum labels from other products. I plan...
Works perfectly
Would RecommendThis is a solvent used to clean foam dispensing gun. Works like it is designed. Just screw it onto gun and spray until all foam is out of gun. Unscrew and save until needed again. I have not used a whole can yet. Can't say how many times it can be used until empty. One thing I found out. After removing cleaner can from gun, squeeze gun trigger in a safe direction to get remaining pressurized cleaner out. I found this out by accident. Almost sprayed it on my new BMW.
Great cleaner for Great Stuff gun took.
Would RecommendDissolved great stuff material in the gun quickly. Also worked perfect to clean my other tools used that had the material on it.. I was surprised that it even got cured material off after several days. Good cleaner!!
Keeps Gun Ready for Reuse.
Would RecommendAfter each use of the Pro 14 I follow the instructions to the letter for clean-up. I have worked with the messy little cans of foam before and have never been able to go back to a partially used can to finish whatever was left in the can. When I used the Pro 14 cleaner it left the gun ready for my next use whether it was minutes or days latter. I cleaned the gun into an old coffee can which I dumped into the trash. There was not a lot of residue to toss out.
Cleaner works well
Would RecommendThe application gun cleaner works well. It attaches directly to the gun to clear the gun nozzle and there is an extra spray attachment to use for hand cleaning or to remove foam from any other surface. Recommend using the cleaner outside where there is copious ventilation.
GREAT STUFF Pro Dispensing Gun
Would RecommendGood idea, poor execution. Allows you to apply the product more accurately and utilize the entire product with no waste. That being said, I found it difficult to clean and a bit messy.
Hi Rick, thanks for your feedback. We recommend our GREAT STUFF PRO™ Gun Cleaner for the easiest clean up process. Lowe's Loop
Dispensing Gun Cleaner
Would RecommendA must have to keep your Adjustable Flow Control Reusable Spray Foam Insulation Gun in working order.
GREAT STUFF Pro Dispensing Gun Cleaner
Would RecommendThis Product is a MUST HAVE for your Great Stuff Pro 14 Foam Gun to keep the "GUN" working Smoothly & Properly and UNCLOGGED!!! IF you follow the instructions and KEEP a can CONNECTED TO the gun at ALL times you should NOT have a problem! AIR is the ENEMY because it EXPANDS this GREAT STUFF Foam and can make your Gun USELESS by EXPANDING inside the Foam Gun and CLOG it up....forever! Do not leave a PRO Series foam dispensing gun without a can of foam on it. Air can get inside and cause resi...
Clean and go
Would RecommendThis is a must have product to use after applying any of the Great Stuff Sealants and Pest Blocks. Attach Pro Gun Cleaner on the Pro Gun immediately after you are finished with the sealant and project. Install the Gun Cleaner and squeeze the trigger on the gun and spray the cleaner through the gun nozzle until it’s clear. Wipe off and store the Great Stuff Pro Gun until you have a new project.
Hi Ken, thanks for your great review! If the PRO Series foam dispensing gun will not be used for more than a month, remove the partial can, clean the...
GREAT STUFF DISPENSING GUN CLEANER
Would RecommendAfter I completed using the Sealer/Insulation pest foam, I used the cleaner as directed to clean the gun. Since I had a empty can of Great Stuff, I cleaned up the gun/can connection with the cleaner and reinstalled the empty used can.
Dose a good job
Would RecommendStay were you put it. It got the old powder of my 1898 rifle so ya it did good. Always new thing out here to try. This work so i will get more .
Hi Glenn, we're glad the product performed so well for you! However, we definitely recommend using a manufacturer-approved firearm cleaner for this a...
Great Stuff gun cleaner
Would RecommendIf you are replacing cans of Great Stuff or getting ready to store your gun for awhile: Close the control valve and remove the can from the gun, there will be residue on the gun, attach the red spray nozzle and spray the area with the cleaner to remove the residue Remove the nozzle from the cleaner can and attach the cleaner can and spray into a waste can several times until spray clean Have some acetone and rag to clean any great stuff on the gun Then you are ready to store your gun
Hi Threerace, thanks for your great review! We recommend not cleaning the gun if you are only switching cans. If it is the same GREAT STUFF™ product,...
Keep things clean
Would RecommendClean uncured foam remaining on your GREAT STUFF PRO series gun nozzle before you walk away so your dispensing gum is ready for re-use Spray the basket where your GREAT STUFF PRO foam attaches to fully void the area of any extra foam remaining when you're job is finished Use the cleaner to spray the top of your GREAT STUFF PRO foam can if you didn't use your full can Remove the red nozzle and thread the cleaner onto your GREAT STUFF PRO gun, then pull the trigger to thoroughly clean the insid...
Gun cleaner
Would RecommendGreat Stuff gun cleaner does the job quickly and easily. Just spray it on and the foam insulation comes right off with no sticky residue. Attach the cleaner to the gun and simply pull the trigger to clean out the gun tube and nozzle. Great product, easy to use. Great Stuff gun cleaner also cleans off finger nail polish very nicely too. Thanks to my granddaughter painting the bathroom, and herself.
Verified Purchaser
Thanks for your great review, Frank! Always make sure you are working in a well-ventilated area when dispensing GREAT STUFF™ foam.