Ratings & Reviews for SpeedOut Metric and standard (SAE) Assorted drive Bolt Extractor Set

Great Extractor

I didn't have a bolt to take out but this worked perfectly for extracting an unusual triangle shaped screw head. I followed the directions as specified and it was able to extract the oddly shaped screw perfectly. Definitely recommend this overall.

Not quite good enough

I had a 1/4-28 steel bolt sheared off and stuck in an aluminum handle. I attempted to get the bolt removed using the smallest speed out as the next size would run risk of getting into the threads. I found it difficult to maintain center in the bolt by hand. Maybe using a drill press would have helped. Once it had drilled deep enough the removal portion of the extractor did engage but before drill pressure could be taken off inorder to use a wrench and remove the bolt, the extractor shank broke. ...

Works as advertised

I tested this on a broken bolt I happened to have and it worked as advertised. In this case It backed out the bolt while I was drilling with out turning it around to the extraction end.

Easily removes stripped screws!

Works excellent and is super easy to use. Just remember to play your Uno Reverse card--everything in reverse, for both drillout and removal. Put a shank in that can match the screw insert area--in REVERSE use the drill out side clean the stripped area, applying low speed and inward pressure. Once cleaned out by 1/16", flip the drill bit to the more conal looking side and again in REVERSE and low speed, apply inward pressure and out pops your stripped screw!

Game changer

The Speedout Bolt extractor set is a must have in your tool box to remove damaged bolts. I remember in order to remove a broken bolt you either had to weld a nut to it and back it up slowly, or drill it out . This tool will fit into any drill (don’t forget to run it in the reverse direction) this will drill out the the center of the bolt head and then you screw down the removal cone to now touch the drilling head (again don’t forget to run if in the revers direction) will grip the bolt to extrac...

Works well with any bolt

This set of bolt extractors is great for removing bolts that have been damaged or rounded off by overuse. The cutting blades are tough and cut quickly through the bolt head. It is simple to drill out, and then switch drill rotation to remove the bolt.

Large bolt extractor kit

The Speed Out Pro Large bolt extractor kit is just the trick for those larger jobs. This set is made for 1/4 to 1/2 SAE bolts, and/or their metric equivalent. Made with heavy duty M2 steel, No broken bolt can withstand their raw, throbbing power.

Speed out bolt extractor

Speed out bolt extractor set. This set requires a little more work to make it work. First you have to drill through the bolt head and then place the other end of the speed out and thread it into the drilled out hole. It does work and the speed out pieces are quality made.

Heavy-Duty Bolt Removers That Actually Get the Job

This bolt remover set is strong, durable, and grips extremely well. I had a rusted bolt on my mower deck that refused to move. These bits bit right in and pulled it out without slipping once. The steel feels high quality, and the sizing is perfect for common household and automotive bolts. Great to keep around for heavier-duty jobs where a screw extractor isn’t enough. Highly recommend this set if you deal with older equipment or rusted bolts.

Great tool for every toolbox

Great tool for any stripped screw. Easy to use. Very durable and easy to add to any drill you may have. Perfectly fits any handyman’s tool box for those weekend jobs.

Bolts

This is a assorted drive bolt extractor set this removes stripped or broken bolts, perfect for any job these are durable and well made, quality material.

Easy to use and effective!

These stripped screw removers are great. the variety of sizes helps when I'm working on these old wood projects. I've never used extractors before and these made it easy.

Speed Out Pro Bolt Extractor

This is for the bolts 6-12 mm extractor. For the purpose of demonstration I put a screw into a block of wood and stripped out the head. I was able to extract the screw. I did not have a bolt handy to use. I used the but and the screw came right out.

Worked great, very handy.

I really like the left hand drill part. And then having the extractor part on it was really handy. I was impressed with the tip on the drill, it actually cut pretty good. I wondered if the tip was going to be long enough that it would go deep enough for the extractor to get into the hole far enough to get a good bite. It got down in there and with a slight lean on the drill it got a good bite. I found that with the drill barely turning, with a lot of torque, it works way better.

Quality tool

Double ended design with the standard and metric threads is convenient and it’s a small compact case that does not take up too much space in the toolbox

About time! Loved these smooth bolt extractors!

This is something I ALWAYS wanted and needed, but hadn’t ever seen before. Those stripped bolts need something besides cutting them or using a torch. Worked slick on the bolt I tried it on. Need to have labeling on the outside case so you don’t loose them in the tool box. Also, don’t throw away the packaging as that is the only instructions. (This needs fixing). Worked with both power and hand drills. You will need a wrench to extract, as power drill was too powerful and hand drill couldn’t. But...

Really disappointed and spent way too much time

I tried but failed with my test case. I spent way too much time trying to test this product. Very frustrated. In addition, 1 of the bits started disintegrating. The 4 included extractors come in a nice black sturdy case. They are labeled 1/4in-M6 thru 1/2in-M12 from smallest to largest in the set. The 1/4in-M6 (6mm) corresponds to 1/4in bolt extraction candidates. The 5/16in-M8 (8mm) corresponds to 5/16in bolt extraction candidates. The 3/8in-M10 (10mm) corresponds to 3/8in bolt extracti...

Metric screw extractor

Steel Double-Ended 4-in Screw extractor set is very nice to have when you need to get a broken screw out. I like having these because they are very durable and work great.

Work great!!

Ok...received three different sets of these and these worked the best. Love how there set to extract after drilling! (Remomber to drill counte-clockwise!!) Wold recomend for small to med size screws. Use the larger set for bolts

Easy to use bolt extractors

Speedout Pro Bolt Extractor bits are well made and easy to use. There wasn't any complicated instructions. Just drill out the bolt head in reverse, flip the bit over and extract.