Ratings & Reviews for RELIABILT 1-in x 3-in x 6-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board
Ratings may include incentivized customer reviews.
What Customers Are Saying
The poplar boards are generally of good quality, with many customers praising the straightness, flatness, and lack of defects in the wood. The boards were easy to work with, produced a nice finish, and were suitable for a variety of DIY projects. However, some customers had to sort through multiple boards to find the few that were straight and defect-free, and a few mentioned variations in thickness. While a small number of reviewers found the boards to be of poor quality, the majority were satisfied, finding the wood easy to stain and finish, with consistent grain patterns and a lack of knots.
Customer review summary generated by AI, including incentivized reviews.Easy to use
Would RecommendGood selection of dimensional lumber. This material is easy to use and dimensions were spot on.
From 1-in x 3-in x 8-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board Verified PurchaserSweepstakes
Poplar Boards
Would Not RecommendWe recently purchased several of these boards to redo some trim in our kitchen. Unfortunately, our Lowe's only had green ones in stock (which we have never used before and our Lowe's usually always has the "yellow" ones). We will never buy green again! The grain keeps popping up even after multiple sanding, priming, sanding, painting, sanding, painting... you get the idea! ug!
Verified PurchaserSweepstakes
worked perfect!
Would RecommendBuilt a picture ledge for behind our couch with this poplar, high grade wood, loved it!
Verified PurchaserVerified Pro Sweepstakes
Straight and Clean
Would RecommendUse as Trim and it is perfectly straight and cut very cleanly does not need much sanding at all
From 1-in x 3-in x 4-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board Verified PurchaserSweepstakes
A board
Would RecommendIt’s just a board, so there’s really not much to rate about it. Although I did have to sort through many of them to find a straight one, but I did, so all’s good
Verified PurchaserSweepstakes
Corner and door work on shed
Would RecommendFortunately boards came in almost perfect lengths for working I was doing. Very paintable. Much harder than what was being replaced. Shed looks 100%better.
From 1-in x 3-in x 4-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board Verified PurchaserSweepstakes
Poplar board
Would RecommendNeeded new bed slats - poplar is light , strong , no knots and stable wood
From 1-in x 3-in x 4-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board Verified PurchaserSweepstakes
Strong and beautiful.
I needed this little slice of poplar wood to reinforce my RV dinette table. It did the job ... perfectly.
From 1-in x 3-in x 4-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board Verified PurchaserSweepstakes
Quality wood product
Would RecommendVery well chosen piece of lumber straight and smooth pieces to work with will stop there in future if this type of wood is needed in the future
Verified PurchaserSweepstakes
Nice and Straight
Would RecommendThis wood is usually very straight and easy to work with. Not super expensive. Will purchase again when needed.
From 1-in x 3-in x 8-ft Unfinished FAS and Better S4S Poplar Common Hardwood Board Verified PurchaserSweepstakes
Polar wood
Would RecommendExcellent for building furniture with. Needs a lot of conditioner if using stain.
Verified PurchaserSweepstakes