Ratings & Reviews for Project Source 0.75-in x 25-ft Red oak Iron-on Veneer Edging
Ratings may include incentivized customer reviews.
What Customers Are Saying
The wood edge banding product is a versatile and effective solution for finishing the edges of plywood and other wood projects. Customers praised the ease of application, with the heat-activated adhesive bonding well to the wood and allowing the banding to be easily trimmed and sanded. Many noted that the banding took stain or paint well, blending seamlessly with the rest of the project. The product works well for a variety of applications and can be used to cover cracks or imperfections, providing a professional, finished look. While a few reviewers mentioned the width being narrower than expected, the overall consensus is that this is a high-quality, user-friendly product.
Customer review summary generated by AI, including incentivized reviews.Fantastic finishing product!!!
Would RecommendI am becoming a pretty good Carpenter and Builder of household projects. I built an outdoor kitchen and needed to finish the rough edges of the tabletop. So the idea of using wood veneer came to mind. I've never used wood veneer before and decided to use some for this project. I started out using the foil to protect my iron, but was much easier to scrap the foil. It ended up working out perfectly and I will definitely use it on future projects.
Looks great
Would RecommendHad to modify a cabinet in my new house. Bought this trim to cover the rough edge after cutting the cabinet down to size. First attempt failed because the iron was too hot. After adjusting the iron it worked perfectly. It looks great in the cabinet looks like it was made that way at the factory! Great product!
Works great!
Would RecommendUsed this to edge some 3/4 inch plywood. I did have someone help keep it straight while I used the iron. All it needed was a little sanding to get some of the excess glue off and it was perfect. Would definitely use this again.
Easy and worth
Would RecommendI used on 3/4" & 1/2" Red Oak Plywood to make file cabinets, nightstands and a coffee table, works great. It hides the raw edge and easy to cut the excess of veneer, just use an Iron Machine and an edging cutter and done. Also, works perfect with Oil base/stain and water base paint. On my next project I'll use the 12"w x 4' L Edging veneer, I'll see how it works!!!
Woodworker's Friend
Would RecommendI use this edging every time I work with plywood it hides all the raw edges and takes a stain wonderfully. I can't believe how much time it saves me and you cannot screw it up it goes on with an iron and you can remove it with an iron, I can't say enough about this edging.
This product is great!
Would RecommendI have used this product about 2 years ago, and would recommend it to anyone. It's easy to use, and stains great!
Good
Would RecommendProduct very good easy to use . I used on 3/4" Plywood to make a file cabinet works great .