Ratings & Reviews for Project Source 40-lb 1/8-in x 2-1/2-in Molly Bolt Anchors with Screws Included 15-Pack

Horrible product

Three out of the four anchors failed horribly. Two of them would not grab on to the drywall so it just spins making a giant hole, and the third one failed behind the wall twisting toward the bolt threads. Just a terrible product.

So far so good

I needed these to hang a few floating shelves and these had the small head I was looking for. So I hung one nail to the stud, measured it out and drilled as per the instructions on the back; seems to hold up alright, a lot sturdier than when I was punching a hole into the drywall with a nail. I haven't put a ton of load onto it (it's a bunch of CD's and figures so it's like 3lbs tops) but it's rigid so I'm happy as hell.

Junk. Failed to install properly. Fell apart

I have uses many makes/models of hollow wall anchors. These bit me on 2 jobs. Made hole, inserted, ran screw in and then attempted too run the screw back out to assemble hardware. THE SCREW WOULD NOT COME BACK OUT. ENDED UP DESSTROYING THE ANCHORS AND MODIFY MY WHOLE PROJECT. THREW THAT BOX AWAY. HAD ANOTHER PROJECT YESTERDAY AND I FOUND A BOX THAT I HAD. SAME ISSUE WITH THIS BOX. REALIZED IT WAS THE SAME BRAD. The company's website is very privative. Awaiting their response.

Great drywall anchors

Easily installed, hold very well. I’ve been using these for a couple years and have never had one pull out.

complete junk

a great style anchor but Blue Hawk completely failed to quality check. 1 in 10 actually worked, the rest had the screw threads strip before the anchor pulled tight. Don't waste your time or money, get a different brand. Take it from a pro. Complete junk

Great Wall anchors. Used them before & will again

I choose these anchors when I really care about what I am mounting and where. Simple no mess. Just hammer them in and screw it down to secure on the wall.

Sturdy wall anchors

I needed wall anchors to secure pictures and mirrors that are often subjected to earthquakes here in Alaska. We’ve had other hangers that failed. I think these will do the job.

This wall anchor is cheaply made and strips easily

First, this is a wall anchor. I have older versions and thought this new, easy to strip anomaly was due to a worn phillips bit. I tossed the old bit and tried a new one to find the bit was not the issue. I then tried one of the older unused anchors and had no stripping issues. Upon analysis, the screw heads of this product are very shallow hence the stripping issue. Do not buy this product

Drywall anchors

These work perfectly as drywall anchors. Just drive them in, drill tighten to spread the anchor on the backside of the drywall, then unscrew the screw out of the anchor. Very solid and not going anywhere.

great product

had a difficult time locating something to hang heavy pictures one of the staff helped me find these.