Ratings & Reviews for Power Pro #9 x 2-1/4-in Star -Drive Self-tapping point Cement board Screws 100 -Count
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these screws for exceptional quality, durability, and reliable performance. Most highlight smooth driving into cement board and wood without pre-drilling, excellent holding power, and flush countersinking without splitting. The included star bit and self-tapping design receive strong appreciation for preventing stripping and improving torque transfer. Many commend the epoxy coating for superior corrosion resistance in moisture-prone areas. Some report difficulty getting screws started or bit seating issues, and a few prefer competing brands, but these concerns are far outweighed by widespread satisfaction and strong recommendations.
Customer review summary generated by AI, including incentivized reviews.T20 Head is too Small - Ruined multiple bits
Would Not RecommendRuined multiple bits trying to just get them level with the 1/4 inch board. Bought 700 and going to throw the rest away and get something with a T25 - Have used a BUNCH of those and never ever ruined a bit. Adjusted the driver torque every way I know.. either it can't sink the screw or the bit explodes.
From #9 x 1-5_SLASH_8-in Star -Drive Self-tapping point Cement board Screws 700 -Count
Hole in one no issues
Would RecommendMan did these things hold tight and didn’t create excess mess! Was wonderful to see them work so well.
From #9 x 1-1_SLASH_4-in Star -Drive Self-tapping point Cement board Screws 185 -Count Verified Purchaser
had to predrill concrete board Rock on screws are better
Hello, Thank you for providing us with information on your product experience. We apologize that the product did not perform to your expectations and... Read More
go screw
Would RecommendIt's a screw, what else can I say? They screwed my cement fiberboard and hopefully will last long.
Verified Purchaser
Get these
Would RecommendPower Pro vs Backer-On, Power Pro hands down. These screws perform like they should. Countersink clean without pulling material up like the other. Much less cracking and fracturing of Hardi- Board on the edges with these compared to the other. Plus the lack of a serrated head is less wear and tear on your fingers when you're driving 500...
From #9 x 1-5_SLASH_8-in Star -Drive Self-tapping point Cement board Screws 140 -Count
Easy installation
Would RecommendThese fasteners work exactly as advertised, firm grip and no stripping thanks to the head design.
From #9 x 1-5_SLASH_8-in Star -Drive Self-tapping point Cement board Screws 140 -Count Lowe's Loop
Bad Experience
Lowe's was out of Hardiebacker screws, so I bought these. They are terrible. They will not self drill through the board. Quickly ran my drill down struggling to get 10 screws in. Even though they are star drive the head easily strips. Would not recommend.
Thank you for your feedback, we apologize you had a negative experience with this product. Please know that quality is important to us and we incorpo... Read More
Horrible with Hardie
Would Not RecommendLowes was out of Hardie screws, so I grabbed these for 1/4 inch Hardie. I started with some leftover Hardie screws I had (same length). Then switched to these. I struggled SO MUCH to get these to screw in flush with the cement board!!! Before they set flush, they almost always strip and just spin. About 1 in 15 would not set right in the bit, and would wobble...unusable. Fought with these too much. Dozens of screws on my floor that I just threw in frustration. Never again. All the 5 star reviews...
From #9 x 1-1_SLASH_4-in Star -Drive Self-tapping point Cement board Screws 185 -Count Sweepstakes
Thank you for your feedback, we apologize you had a negative experience with this product. Please know that quality is important to us and we incorpo... Read More
Hello, We’re sorry to hear that this product was unsatisfactory and did not perform to your expectations. We will continue to monitor product perform... Read More