Power Pro #9 x 1-1/4-in Star -Drive Self-tapping Cement board Screws 925 -Count
Item #1147930 |
Model #48889
925 pieces per package
Conforms to ANSI A108.11 specifications for cement board installation
Works great in all cement board brands
Drives into wood and/or metal studs
High-low thread design drives clean and fast through dense cement board material
No pre-drilling required for installation
Limited lifetime guarantee against rust and corrosion
Comes with a free T20 Prostik bit, offering stable driving and one hand operation
General | |||
|---|---|---|---|
Finish | Ceramic | Number of Pieces | 925 |
Manufacturer Color/Finish | Gray | Head Type | Wafer |
Type | Cement board | Thread Type | Coarse |
Material | Steel | Point Type | Self-tapping |
Dimensions | |||
|---|---|---|---|
Length Measurement | 1-1/4-in | Screw Thickness | #9 |
Package Weight (lbs.) | 5 | ||
Features | |||
|---|---|---|---|
Drive | Star | Multi-Material | Yes |
Materials Fastened | Cement board to wood | ||
Certifications | |||
|---|---|---|---|
CA Residents: Prop 65 Warning(s) | No | ||
Warranty | |||
|---|---|---|---|
Warranty | Limited lifetime | ||
Compatibility | |||
|---|---|---|---|
For Use on Plastic | No | For Use on Concrete | No |
For Use on Composite | No | For Use on Drywall | No |
For Use on Metal | Yes | For Use on Brick | No |
For Use on Wood | Yes | For Use on Vinyl | No |
Miscellaneous | |||
|---|---|---|---|
UNSPSC | 31161500 | ||
Check out the Best Selling Specialty Screws on Lowes.com
Ratings may include incentivized customer reviews.
Great product.
Nice price and does the job it’s intended to do!
Verified Purchaser
Great length for all projects
Great quality especially this length since it’s for all types of projects
Verified Purchaser
Would not bite
Had a small project to install and bought these to secure the cement board, they would spin and spin and not bite. Returned the unused ones and bought the other brand which drove with one hand. These also chewed through T20 bits while the other brand uses T25 which are more robust. Save time get the other brand.
Drive too small
Needs to be T25 head, just breaks T20's like crazy.
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...
Star-drive cement board screws
The star-drive cement board screws are excellent. They made putting up the shower board easy.
Verified Purchaser
Run away
Very bad. Every single screw will slip wobble and fall. Why? They are T24 but screws. Stay with T25. Don’t ever use these. Caused me so much stress!!! 25 years doing this. I was tricked. Never again.
Hello, Thank you for providing us feedback on your product experience. We apologize for the inconvenience and appreciate you bringing this issue to o...
Trouble screwing unless you predrill...
These are a royal pain to drill into cement board. The fix to this is spending the time to predrill every hole. At this point they work just as good as any other screw. I expected them to be easier.
Verified Purchaser
Hello, and thank you for your product review. We appreciate your feedback.
Better products out there
Similar to the other low reviews, these use a T20 bit with poor fit where the main competitors use a T25 bit with better quality control. These were frustrating to use as they wouldn't countersink easily and I went through about $40 in T20 impact bits trying to fully seat them, ended up running out of bits and hammering the rest flush in frustration. I needed some more to finish the job and bought backer-ons instead and they went in much easier I wish I bought those in the first place.
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...
Don't buy it.
The screw is made for a T20 drive bit which is too small. Similar products use T25. I used Dewalt drive bits which are top of the line but they deformed & galled out after driving about 70 screws because the torque diameter & drive slots are too small. Also the screw took way too long to bite into the cement board, they would typically spin on the long taper point (poor design) 10 - 15 revolutions before self cutting through. I will never buy this product again. Note: there was no drive bit i...
Verified Purchaser
Hello, Thank you for providing us insight on your product experience. We apologize that the product did not perform to your expectations and we will ...
0 Questions
Be the first to ask a question
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...