Ratings & Reviews for IRWIN 1/4-in Hex Quick Connect 12-in Drill Bit Extension

1/4" --- one size too small for my application.

Did not work for polishing and buffing pads because the 1/4" hex socket did not fit any of the polishing mandrels I have which seem to be 5/16". No tool companies seem to make this size for polishing applications. Thus I had to return it.

Always check Lowe's first.

Exactly as advertised and I was also happy with the price.

Good reaching item that is stiff and strong enough

I purchased this as a replacement to other quick release extensions that broke. This item is much more secure and doesn't seem like it will break or lose the bit when pulling out. Good choice and the extra minute to screw in the bit is worth the effort.

just what i needed

mounting a wind ornament into an old tree trunk..needed to drill down deep enough to fully submerge the prongs that are meant to go in the ground. worked perfectly

Very handy and well built tool, but

Had to drill a hole where I was 8"-10" from where I could get the drill to it. See pic. So I looked into this. Its well built and easy to use and set up. Potential problem, there are two types of drill bits. Plain ones and those that are quick release. See second pic. The problem with a regular bit is that when inserted into the extender, it does not center, unless it is really thick. See third picture. But if you use the quick release bits with the thicker attachment, it centers nicely. Luckily...

Perfect for the Job

This extension works as it was intended! I was able to drill through (3) three 2x4 headers in order to get my cables where I needed them! Thanks Irwin!

Did the job without twisting or slipping

good extension

I have always trusted Irwin tools, bought and used this extension the same day, drilled several holes thru 10 inch concrete block using a shorter masonry bit did a great job , it held on to the bit , i'm a happy camper in that I didn't loose the bit or extension

Drill bit extension

Works great! If you need to reach something to drill but it is to tight for your drill this is the ticket. Will hold any round bit without slipping.

Drill Bit

The perfect drill bit that is strong for the drilling jobs I have

IRWIN 1/4-in Hex Quick Connect 12-in Drill Bit Ext

I WAS WORKING ON A PROJECT THAT I NEEDED TO DRILL A 4 FT LONG HOLE. The extension allowed me drill 1 ft at a time and to Keep the hole where it needed to be. If I would have tried to drill the hole $ ft at one time, it would not have came out was well.