Ratings & Reviews for IRWIN SPEEDBOR MAX 5/8-in x 6-in Woodboring Tri-flute bit Drill Bit
Ratings may include incentivized customer reviews.
What Customers Are Saying
The product is a high-performing and versatile woodworking drill bit that can quickly and cleanly drill holes through various types of wood, including hardwoods and old, rough-cut lumber. Many customers praised its sharp, aggressive cutting ability, which allows it to "chew through" the material with minimal effort. However, some caution that its aggressive nature requires careful control, as it can pull the drill forward and potentially cause issues if used improperly or in certain applications. A small number of users also reported that the bit dulled or burned up more quickly than expected, especially when used on very hard woods. Overall, the consensus is that the drill bit is an excellent choice for tasks like boring holes for electrical wiring, installing landscape timbers, and creating pilot holes for other projects, though users should take care when operating it.
Customer review summary generated by AI, including incentivized reviews.Seedling auger
Would RecommendI had heard using a boring bit in a battery operated drill would be a fast and efficient way to plant seedling Larch trees.
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Great product
Would RecommendUsed it to drill holes for rebar in landscape timbers and it worked great really fast through the wood faster than I expected.
From SPEEDBOR MAX 1_SLASH_2-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Great bit
Would RecommendI am happy with this product, very good and did exactly what I needed it to.
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Nice product
Would RecommendBought to drill in landscape timbers for 1/2" rebar and worked great. Very sharp and cuts quickly.
From SPEEDBOR MAX 1_SLASH_2-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
This bit does the job!
Would RecommendBought this to finish a project for my wife. Had to drill some holes through 4x4 posts. This bit did the trick! Recommended!
From SPEEDBOR MAX 1-1_SLASH_4-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Won't Buy Again!
Would Not RecommendI have used these bits for years,mostly 7/8" and 1" . They were great when they made them with the 3/8" shank, but the 1/4" shank just shear off. I went through 3 of the 1/4" shank 1" bits yesterday alone! And I am drilling with an 18volt DeWalt cordless drill. I used to use the 3/ 8" shank bits in my right angle drill for weeks and never broke 1 ! I am a residential electrician and will not be buying again until you start making them with the 3/8" shank again.
From irwin.com
I took drill bit back.
Would RecommendI took drill bit back, because I found two that I already had. I had to give this a rating because the not so user friendly site.
From SPEEDBOR MAX 1_SLASH_2-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Irwin 1/2” woodboring drill bit
Would RecommendWorked perfectly while drilling theee holes for two new garage doors. Has remained sharp for additional jobs. It actually drilled through two layers of aluminum, in addition to the wood interior door.
From SPEEDBOR MAX 1_SLASH_2-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
Nice Bit
Would RecommendThis was a good bit. I bought it to bore out holes in a header board so I could plug them and then remount a sliding barn door. The bit was smooth and made a much cleaner hole then a traditional paddle bit does. I would definitely recommend this bit. The only nock I had against it is that it could get a little squirrelly on you if your not paying attention but that's how it is with a lot of things. also not I was using this bit on softwood and have not used it enough times to comment on dur...
Verified PurchaserSweepstakes
Bore not boring
Would RecommendThis thing will bite through wood like it's its new job. It'll tear a hole like it's paper, until you hit an old screw or nail and burns out. Then you having have a boring bit, cause it won't don't much after that.
From SPEEDBOR MAX 1_SLASH_2-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
GREAT BIT
Would RecommendWE INSTALL FABRIC SHIELD HARDWARE AROUND DOORS AND WINDOWS AND THIS BIT DOES GREAT. ONLY ONE WE USE.
From SPEEDBOR MAX 1_SLASH_2-in x 6-in Woodboring Tri-flute bit Drill Bit Verified PurchaserSweepstakes
woodbor
Would Recommenddoes a good job. Quicker than the old style wood bits.
Verified PurchaserSweepstakes