Ratings & Reviews for Liberty AlignRight Clear Clear Mounting template

Virtually useless

My set is made of plastic so dark that you cannot see any marks thru it.

Great tool but required a little customizing

My new home came without cabinet hardware. After viewing a couple DIY videos I purchased this template to help with the installation of knobs and drawer pulls. It worked great after I made 2 customizations. #1. The hole placement I wanted for my knob didn't match the ones on the template. I marked my cabinet where the knob should be placed and overlaid the transparent template and marked where my custom hole was needed. I drilled my new hole location. Problem solved. #2. The drawer pull te...

Helpful but awkward to work with

This was a good help in making sure the knobs and handles I was installing were lined up correctly. The issue I had with the product is that it's dark in color which makes it difficult to see through which, if clear, would have been helpful. Also, it's recommended on the package to mark the holes you're using so it's easy to make sure you're using the same ones on the next drawer/door. This is where the dark color really was a hindrance because you can't easily mark the holes you're using. B...

Template Junk: Hard to Read

Out of all the colors they could choose to make this template, those chose the color of a pencil mark. Give me a break. How about clear or light orange? Frustrating. Experienced contractor.

Ever wonder how they...

...align all the cabinet hardware? This is it. Use it once and lend it to a friend to disappear forever.

Cabinet Upgrade made easy

These are a must have when upgrading with new hardware in your cabinets!

Easy to Use

I drilled new holes in existing kitchen cabinets to add knobs. This template helped to ensure all were equally aligned.

Handle template

Worked good. Would use a punch not a pencil so the drill stays on point.

Completely acceptable.

This product works well, I had to modify it for my particular cabinet doors.

Makes handles and knobs easier

You get one shot to make the drill hole correct. This was and continues to be very helpful.

Mounting template

Used for new cabinet doors. Template worked well, it was very easy to use.

must have for adding handles to your cabinets

Easy to use and figure out. I used a small punch and hammer to mark the drill spot. Marking on dark cabinets does work well. Makes it easier and quicker if you use tape on the plastic to identify which holes your using.

Kinda cheap but it worked

Used it for mounting cabinet handles and drawer pulls, it was a little warped and hard to align properly because of that, but it ended up working out okay.

Brilliant and Simple

Took a job I was dreading and made it great. Installed over 30 cabinet and drawer pulls in less then 2 hours, entire kitchen! Dot every cabinet where your handle screws need to be, drill all the holes, screw them all in. Made it easy.