Ratings & Reviews for Fluidmaster PerforMAX 2-in Vinyl Toilet Flapper Repair Kit
Ratings may include incentivized customer reviews.
What Customers Are Saying
The product appears to have mixed reviews. Many customers found it easy to install and effective at fixing leaky toilets. However, some reported issues with the adhesive not holding, the flapper being too heavy, and the product not working as advertised. Customers should be aware that while the flapper may be a quick fix, it may not be a long-term solution for all toilet issues.
Customer review summary generated by AI, including incentivized reviews.Failed Stopper
Would Not RecommendI bought two they both failed - seams like a good idea but you should replase all of the seals - do it right
Verified Purchaser
INSTALL TO CLEAN AND DRY VALVE
Would RecommendOur commode and tank has an old brass proprietary flush valve that holds tank to the commode with one bolt that goes through the middle of the flush valve. The edges of the valve that seal to the flapper are corroded and pitted. I drained the tank, scoured the flapper seal edges with a plastic pot-scouring "scrubby" and dried the brass where the new sticky seal would adhere to with a fan until absolutely dry. Used a 3" x 3" block of scrap wood to push down evenly on the flapper sealing surface. ...
Just terrible
Would Not RecommendDid not work as advertised, and their advice is to buy another one...the 1st one didn't work, why buy another. just terrible!
Fluidmaster would like the opportunity to learn more and provide help. Visit our website Fluidmaster.com/support for videos, troubleshooting tips, em...
Very east to install.
Would RecommendWorks well and exactly as described.
Verified Purchaser
Clean and dry before installing
Would RecommendEasy to install. Will fit many tanks and mounts independently of overflow tube.
Verified Purchaser
Did the job! But it was not as easy as I thought ?
Would RecommendAfter 4 times pressing it it, I finally got it to seal. It took all the effort of two fingers and up on my toes pressing down until after the 4 try, the ghosting stopped! Took off the star because of all the weight I had to put on it to seal. Tip when centering over the old opening, remove the flapper, so you are sure to get it centered, and don't be afraid to apply all the pressure you can to get it to seal properly.
Existing fill valve flange should be clean and dry
Easy to install and seems to have a good seal that adheres very well to existing flush valve
Verified Purchaser
easy and it works
Would RecommendI have a really old toilet in my basement. the old float stopper was written and cracking. The old brass fixtures are corroded so as to make replacement impossible and I was about to have to smash the old one out (tank is bolted to the cinderblock wall) and replace it when i figured it give this a try. make sure to clean where you are putting it on. I used some fine steel wool and dried it really well with a hair dryer. the sticky seal went on tight and is not leaking a drip after the first f...
Not leakig
Would RecommendEasy to install and adjust, but I don’t particularly look forward to when it’s time to replace it.
Verified Purchaser
Easy
Would RecommendThis makes for a fast and easy repair to a leaky flap
Verified PurchaserVerified Pro
Easy to Install and Fixes the leak
Would RecommendI tried other flappers and only this one was able to fix a leaky seal
Verified Purchaser
Fluidmaster would like the opportunity to learn more and provide help. Visit our website Fluidmaster.com/support for videos, troubleshooting tips, em...