Different faucet designs, styles, finishes and features allow you to dress up and personalize your space. Explore the options and learn what to look for in your next bathroom faucet.
Not all faucet types work with every sink, so it's important to make sure the faucet you choose will fit your sink or basin. Standard faucet drillings are centerset, single-hole or widespread.
These faucets are made for basins with three holes and have handles that are 4 inches apart. They combine a spout and handles on a single base unit. Some centerset faucets may have two handles mounted onto a 6-inch plate.
They can have a single handle or two handles. If your sink has already been predrilled for extra holes, use an optional plate to cover them up.
These taller faucets are meant to complement a vessel sink, which sits higher than other sink types. They typically come as a single handle.
They're available for above-the-counter and freestanding basins that require a long spout for extended reach. They won't work with basins that have predrilled holes. Wall-mounted faucets require a separate wall-mounted valve and drain for installation. Make sure the spout is long enough for adequate basin clearance. Check that the sink is deep enough to prevent water splashing on your floor or countertops.
This type of faucet works with three-hole basins. They have three separate pieces - two handles and a spout - and the spacing between the handles ranges from 6 to 16 inches.
Shop Bathroom Faucets
Coordinate your faucet color and finish with the rest of the fixtures and accessories in your bathroom. Choose spot-resistant finishes to simplify cleaning. Choices include:
Some faucet sets come with a combination of finishes, such as brass and chrome, that offer a unique look. A combination finish can also be a cost-effective way of making a change in your bathroom. For example, if you currently have brass fittings, you could update with a chrome-and-brass faucet. Just remember to stick to the same finish (example: polished vs antique).
Every type of faucet has an inner valve that controls the flow of water through the spout. The valve quality, with or without a washer, determines the reliability and durability of the faucet. The best choices are faucets with solid brass, brass-based metal or corrosion-resistant workings.
Faucets with a Washer:
They're a common type of faucet that works by means of a stem that rises and falls to open and close the water's passageway.
They have a rotating metal or plastic ball that regulates the amount of incoming water. With only one moving part, the likelihood of a malfunction is greatly reduced. A plastic ball will eventually wear out, but a metal ball is designed for longevity.
They use rubber O-rings inside a cylindrical cartridge to control the flow of water. These faucets are very reliable, especially if equipped with a brass cartridge.
Ceramic Disc Faucets
They're nearly maintenance-free. They have two ceramic discs that move against each other in a shearing action, blocking water or allowing it to pass through. The seal is watertight because the discs are nearly flat.
There's a variety of options for the simple act of turning a faucet on or off. Think about who'll be using your bathroom before you make a selection.
Models offer different finishes to coordinate with the room's décor.
A control similar to a lever, with a different look and a different range of motion.
These function like cross handles, but offer a different style.
These handles usually come in cross or X-shaped design, making them easy to grip and turn. Lever handles are available in many decorative styles.
Turn the water on with a push instead of turning a handle or knob.
Motion-activated faucets don't require handles or knobs at all. Simply place your hands under the spout to activate. A mixing valve allows you to control the blend of hot and cold water, and comes standard with some models but must be purchased separately for others. Some touchless faucets also include a manual override lever as an optional way to control the water flow. These faucets are a safe choice with children since you can control the temperature and flow of water.
Like touchless models, these faucets don't require you to manipulate handles or knobs. Activate them or turn them off with a simple tap to the top of the faucet. A handle controls the water temperature and acts as a manual control. These faucets work well for those with accessibility issues.
With the wide variety of designs, there are additional options to help you find the best faucet for your needs.
Decorative Handle Buttons
These can add a stylish touch to your space.
Integrated Supply Lines
With integrated lines, you won't need to purchase supply lines separately.
The light is emitted from the spout and activated when the water is turned on. There are also options that will change the water to different colors, giving your faucet a unique appearance.
Matching Pop-up Drain
This drain will complete your new look.
They're built to use less water while matching the performance of less efficient models. According to EPA.gov, by installing a WaterSense® faucet an average household can save more than 500 gallons of water a year.
These don't use as much water pressure as standard models and offer a distinct look.
Also look for hardware (robe hooks, toilet paper holders, towel bars and rings) and vanity lighting that coordinate with some faucet models.
Shop Bathroom Accessories & Hardware