Continental Ceiling tiles are an excellent choice for restoration or renovation projects, adding historic tin ceiling charm and early 20th-century character to any space. They can be used as focal point or border tiles, and are also suitable as lay-in re-facing tiles for suspended or drop ceiling installations where you wish to retain existing mineral fiber acoustical tiles. Easier to handle, safer to install, and more cost-effective than authentic tin, these tiles can be purchased and installed with confidence, knowing that Ceilume products adhere to the highest standards of quality, safety, and environmental responsibility.
Made from durable 0.030 in thick rigid vinyl material, this product functions as a drop-in tile for standard or slimline grid systems, and can be used to reface existing mineral fiber tiles.
Will not rust, stain, or corrode, and are unaffected by water or humidity; they are resistant to mold, mildew, and bacteria.
Impact resistant ceiling panels are 2 ft x 2 ft (actual size 23 3/4 in x 23 3/4 in), each panel covers a 4 sq ft area, and each case contains 6 individual tiles that covers a total of 24 sq ft
No special tools or skills required for installation and no sheet metal cuts
Excellent for remodeling or new construction, these elegant decorative ceiling panels trim easily with scissors or aviation snips for can light openings, etc.
ASTM-E84 Class A fire rated, IAPMO UES ER-310 recognized compliant with 2006, 2009 and 2012 International Building Code, FDA compliant for food preparation areas, GREENGUARD Environmental Institute Certified for Indoor Air Quality and Children and Schools, and fully recyclable
Made in the USA
Trims easily for use as a border or filler panel where less than full sized panels are required
As a general rule, Ceilume ceiling tiles and panels will not be affected by ceiling level temperatures up to 120°F; in some installations involving halogen lights, metal heat registers and, radiant heat sources (wood stoves, kitchen ovens, etc ), localized ceiling and ceiling tile temperatures can be much higher than anticipated; please contact the manufacturer for specific advice if your installation has any of these special conditions