Ratings & Reviews for Union Corrugating 1.5-in x 1.5-in x 10-in Aluminum Z Flashing

hunting cabin

bends far too easily for storage and transport. however, easily applied to roofing

Good but handle with care.

These drip mold pieces work as they should but they are easily bent or damaged if you are not careful in handling them.

Drip cap adds weather protection

This product when installed helps shed the rain from the top of an exterior door. This product was easy to cut with aviation shears. This product is of light gauge aluminum and is easily bent if not carefully handled. I like the added weather protection this product provides my new door.

Bridge the Gutter Gap

I installed the five inch PVC gutter. The gutters mounting hardware spaces it about a quarter of an inch off the board leaving lots of room for water dripping off the roof lots of room to drip and cancel the whole reason of a gutter. I used pieces of this Step Flashing. I opened the angle from 90 degrees to about 135 degrees. I slipped the 'flat' side between the mounting service and the roofs flashing. Solved the 'leaking' problem.

Extremely thin and flimsy

These work if you can get them that are bent up. They are cheap and very thin. I didn't really know what I was ordering and will select something different next time.

I used this flashing to flash a storage building

I used this flashing to flash the base of a storage building.It has not rained yet so I can't comment whether it works.

edging

I used this to edge my roof on my patio worked great

When handled do not handle from the end, very thin aluminum will not support its own weight .Looks very good and easy to install .Price was great. I would have given a 5 star rating if they were just a little stronger .

It works

It works as advertised. It's a piece of folded aluminum, for Heaven's sake. About as simple as could be.

Perfect for the job

This is just what we needed for a quick project as we prepare to move. Our local Lowes had it in stock and for a great price.

Firm flashing, easy to cut

This flashing was not too flimsy, cut easily with tin snips, and holds its shape very well.

It's just flashing right?

Sure, this such an innocuous piece of material prone to being a second thought by us do-it-yourselfers but if you don't pay homage to the flashing gods...you're in for it. The water demons will eat your home alive to such great effect you will rue the day you missed installing it. But hey, "No one but me will know that I blew this off, right?" Yeah, right up until you have to hire a professional to replace whatever it is that has now fallen into ruin. And they will dime you out. Your spouse w...