Ratings & Reviews for Tapcon 5/32-in x 7-in Carbide Masonry Drill Bit For Hammer drill
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise the drill bit's cutting performance in concrete and masonry, reporting it drills quickly, stays sharp across multiple holes, and outperforms competing brands. Many highlight its effectiveness with hammer drills and Tapcon installations, describing superior dust clearance and sustained sharpness through 7-10 holes. Most find it reliable and recommend repurchasing. However, some experienced premature dulling or bending after just 1-3 holes, particularly on dense concrete. Despite these isolated concerns, the vast majority consider it an excellent choice for masonry work.
Customer review summary generated by AI, including incentivized reviews.Not good on concrete or metal
Would Not RecommendIt didn’t serve the purpose.
Sturdy drill vit
Great drill bit to prep holes for installing bottom plate on cincrete floors. Large head lets you put more pressure on the bit without bending.
From 3-1_SLASH_16-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Worked as it should.
Would RecommendProper size hole made.
From 3_SLASH_8-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Maybe a really good hammer drill.
Would Not RecommendNot sharp as needed.
Good, strong drill bit
Would RecommendAfter it rained water would pool on my Lanai along the border of the bird cage. I needed a good, long, masonry drill bit to drill drain holes along this border. This carbide masonry drill bit did the trick and made short work of the drilling project.
From 3_SLASH_8-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Works great on tile and concrete
Would RecommendI burned a couple other brand bits trying to drill 1.5" holes for anchors in concrete and through tile. In a 1/2" hammer drill (not even an SDS) this chewed right through the job. A total of 15 holes for Tapcon screws and all I had to do was let it cool between runs.
Great Cement Drill Bit
Would RecommendDrill through cement very easily.
From 1_SLASH_4-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Not for concrete
Would Not RecommendIt works on bricks but it simply does not work on concrete slabs although its description says so otherwise; it barely drilled in 1" of 4" a concrete slab.
1
Would Recommendworked I should
Verified Purchaser
Figure what needs to be done, get the materials
Would RecommendI had to install some 4” square posts up against a cinder block wall. The posts did not carry any substantial weight. Using a wood drill bit; I pre drilled the holes in the posts. I Leveled the posts to the cinder block wall; Used this cap con Drill bit in the pre drilled holes and drilled into the cinder blocks. I needed the length to be able to reach the wall.
From 1_SLASH_4-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Concrete drill
Would RecommendWorked great
From 3_SLASH_8-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
concrete bit
Would RecommendEasy to use
From 3_SLASH_8-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
it is good
Would RecommendThis drill worked fine in old concrete
From 1_SLASH_4-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Drilled 25 holes easily
Would RecommendWell made bit
From 1_SLASH_2-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Good product just wish they were an inch longer
Strong bit. I dont have to replace very often
From 3-1_SLASH_16-in x Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Hi there, thank you for sharing your feedback. We are sorry to hear that your experience with our Drill Bits did not match your expectations and did ... Read More