Ratings & Reviews for Tapcon 5/32-in x 7-in Carbide Masonry Drill Bit For Hammer drill
Ratings may include incentivized customer reviews.
What Customers Are Saying
The drill bits are generally effective for drilling into concrete, brick, and other masonry materials. Key strengths include durability, precision, and efficiency, especially when used with a hammer drill. However, some users reported the bits dulling or bending too quickly, particularly when drilling very dense or thick concrete. Additionally, a few customers experienced issues with the bits not fitting properly in their drill chucks.
Customer review summary generated by AI, including incentivized reviews.Good for concrete drilling
Would RecommendWe needed to drill concrete for anchors, the bit did the job with no problems.
From 3_SLASH_8-in x 8-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Useless
Would Not RecommendOnly drilled about 4 holes in brick then got dull and would not work anymore. For the price it should last longer
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Better Drill Bit
Would Not RecommendI have tried Bosch masonry bits and they work poorly in concrete when compared to TapCon bits. The flutes on the Bosch bits are finer and don’t clear the concrete dust from the hole causing the bit to overheat, dull, and quickly stop cutting.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Nice
Would RecommendSturdy construction, drill perfectly and with easy. Nice to have
From 1_SLASH_4-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Fast
Would RecommendGot the job done real fast Made short work of drilling holes for anchor bolts
From 1_SLASH_2-in x 10-in Carbide Masonry Drill Bit For Hammer drill Verified Purchaser
Keep it cool.
Would RecommendWe used 2 of these for anchoring treated wood into my basement floor. 1 got hot a little fast and smoothed after like 8 holes. The other though cut over 200 holes without an issue.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Excellent bit
Would RecommendExcellent bit a must if you want to install your tapcon screws correctly with a sds hammer drill
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Sturdy bit
Would RecommendThis bit is far more durable than what comes in the box with Tapcon screws. It is also long enough to drill through a 2x and far enough into the concrete in one pass in order to sink a 4 inch tapcon.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Works best with a hammer drill
Would RecommendPerfect bit to accomplish the job. Coundkt have gotten it done without it
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Use a Bosch bit, or consider another anchoring sys
Would Not RecommendThe Tapcon drill bit bent while using my sds plus drill. I don't believe I abused this bit. I purchased a Bosch bit afterwards and it worked fine. Since the bit bent, it increased the diameter of the hole and now the Tapcon screw didn't fit tight enough to hold. It was a complete mess. I won't use the Tapcon system again.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Did not stay sharp long
Would Not RecommendAfter drilling the 3rd hole, the bit was very dull
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserVerified Pro Incentivized
Good for concrete or brick
This bit worked great for drilling into concrete, got the job done and everyone was happy.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized
Expensive but worth it
Would RecommendVery durable and consistent. These are pricey, but hold up very well for repetitive drilling.
From 3-1_SLASH_16-in x 7-in Carbide Masonry Drill Bit For Hammer drill Verified PurchaserIncentivized