Ratings & Reviews for Project Source Curry 9/16-in T x 1-7/8-in W x 78.7-in L Painted Vinyl Stair Nosing Floor Moulding Trim

xxxxx

it should have been darker

realize how it will look transitioning floors

transitions between floorings- its larger than expected but it does the job.

Looks very nice.

I ordered this for installation by Lowe's. It has not been installed yet but looked very good in the store.

Best transition strip I have ever used

This transition strip is some of the best i have ever used. It comes with 2 different base strips that allow you to use this one strip for matching up to any other existing flooring you might have. It does not come with screws, so you will need screws to work with whatever your subfloor is. The strip is made out of a very high quality, dense plastic that cut very smooth with a mitre saw. The strip snaps firmly into the base and stays put. Lighty tapping with a rubber mallet is the perfect w...

Nice color match and easy to work with.

This Project Source quarter round matches the Ainsley Oak Luxury flooring perfectly. This is a partical board type of product that for this application yeilds a straight easy to work with product. Cuts are very smooth and the amount of dust created is minimal, you can cut at the installation location rather than making several trips back and forth to a saw sration outside. Nailing is easy and no splitting using a air nail gumln.

Garbage. Don't waste your money and time.

I installed nice LVP ProCore flooring. Looks good. But these doorway transitions are a disappointing and expensive failure. Brittle, breaks, and won't stay together. I have two that were basically destroyed while trying to install them. I am returning the other one and will have to find something else that will work. Stay away from this crap!

One molding kit that does it all

Its very versatile molding trim kit and does many things, hard to hard surface or carpet or end. Its light weight and flexible that makes it easy to install. You have to be little precise with its installation on the surface, its surface has little unevenness, it bumps up a little. I also nailed(used slim nail) it on the ends to ensure good grip to the surface, although, it may not be necessary for most. Color matches perfect with my flooring.

Fine finish quarter round

Its really hard to find perfect matching trims, this one matches perfectly with my flooring. Its easy to cut using miter saw and does not splinter. Finish does not scratch and see absorbed into the quarter round, any scratch won't show.

Decent transition molding

I installed this going from vinyl plank to tile. I was first concerned with no way to adhere it to the floor, but with the weight of the flooring, it keeps it down. The molding is easy to trim with large scissors. You have to use a razor knife on the inside groove when you are done to clean it up a bit, but trimmed down to size very easy. It took a bit to figure out the spacing needed to get it up to the height required to meet both floorings, but when it snaps in, it’s very solid and tight. ...

Ainsley Oak Transition

Nice transition piece between equal height flooring carpet or subfloor and concrete. Matches Ainsley Oak perfectly and looks great. Easy to cut and install!

Addison Oak trim

Nice quarter round to match our Addison Oak flooring. Easy to cut and install and does not split like hardwood quarter round usually does unless you pre drill it.

Matched perfectly!

I really like this particular quarter round. It matches my flooring perfectly. I used it in the kitchen when I installed flooring over the top of the existing tile floor. It is very simple to cut with a miter saw and doesn’t leave the hair strands on the end like other brands. Installed easily with a pin nailer and you can barely see the nails if your actually looking for them.

Just what I needed

This is just what I needed to finish off my laminate floor to entry door. This 4 in 1 molding kit is very versatile, all major transitions have been thought out with this kit, from two level surfaces to two different. With ways to shim up or stay flat just use a sharp blade to trim pieces as needed. Now I usually frown on all plastic construction but this is what you need when leaving expansion joints for flooring like against my entry door, it doesn’t expand or contract. I used the white shim a...

Quick and easy

All in one package!

This room separator is essential for any flooring job. The color and match to the corresponding flooring it goes with is perfect. It is super flexible making it great to get that super tight fit pressing it down into place. It comes with the additional pieces that allow you use it in just any any application you need. It has the simple center click rail that will allow you to join it from one floor to the other whether it's even grade or slightly elevated or below and then it has the additional ...

Pliable for the old un-square home

This edge molding is beautiful and matches perfectly with the flooring. That may sound like an obvious thing while I have seen others where the color shade was off quite a bit. The molding itself is quite flexible which is perfect for the older homes that may not be so square on the walls. It cut super easy and I was able to use a file in some areas where I wanted to work the fit a little more. The base material is like a particle board so it makes quite a bit of a mess when you cut it. This, I ...