Ratings may include incentivized customer reviews.
What Customers Are Saying
The sawhorse brackets were found to be easy to assemble and adjust, allowing users to customize the height and width using different lengths of lumber. However, some customers reported issues with the thin, flimsy metal construction, which caused the brackets to bend or break under moderate weight. Additionally, the leg angle was not wide enough, leading to instability, and the brackets did not properly grip standard lumber, requiring modifications. Overall, the brackets appear suitable for light, occasional use, but may not be durable enough for heavy-duty needs.
Customer review summary generated by AI, including incentivized reviews.You need to buy two.
Would RecommendShould be packaged 2 in a package. Who builds one saw horse?
Verified Purchaser
Flimsy
Would Not RecommendThe product is surprisingly flimsy. The metal is thin and easily deforms under load.
Verified Purchaser
Faulty Design, won't work with 2x4 stock lumber.
Would Not RecommendI purchased these (or a better much version of these) some years ago and they were GREAT. But these newer versions will not clamp a 2x4 properly. The dimensions for the legs are fine, but the top part is designed to clamp a board that is 1-1/4" wide, NOT 1-1/2" wide (which is a standard 2x4). I considered ripping 2x4s down on the table saw to 1-1/4" to make these work, but then decided to see what else was available and probably return these. I'll update with what I find.
Cheap made but good for one time use
Would Not RecommendThe sawhorse brackets were thin gauge and bent easily. They are good for one time use go ahead and buy better ones
Needs the be double sets
Would Not RecommendI truly thought they would package these for 2 sawhorses.
Verified Purchaser
Too expensive for what you get
Would Not RecommendVerified Purchaser
DIY sawhorse works as described.
Would RecommendA simple to use solution to quickly assemble your own sawhorses. Must use graded dimensional lumber or cut your rough cut down to size to fit.
Easy to do
Would RecommendQuality product for Medium projects. However I was able to stack almost a whole lumber package for a 12x10 pergola on the saw horses to be stained before Assembly. These braces were easy to use and produce saw horses. I only added the side “A” braces for stronger support at no extra cost because I used the small pieces of 2x4’s I had after cutting the legs to size.
Ll
Have bought on several occasions
A little light weight
What I needed
They are available and they help alot!
Would RecommendI needed some for some projects.
Ok, not great
Would Not RecommendWhy can’t they make something heavy duty anymore. These are ok… but definitely not worth a good or great rating. They are flimsy. I would pay more money for something stiffer in the hinge and not made out of flimsy sheet metal.
Make sure to use screws to attach to your 2x4
Would RecommendActually they are pretty good. If the metal was just a little stronger 💪 they would be fantastic
Should be labeled as light duty brackets.
After assembly, I discovered how flimsy these brackets were as they easily twisted with 2x4 legs inserted. Had to reinforce them with extra screws into the legs which made disassembly for storage a hassle.
It does not come with screws. It takes 2 people.
Would RecommendEasy to use & fits perfectly.
very very weak at best
Would Not Recommendwouldnt give 5$ for a case of them ,,would like to get my money back
Decent, but could be better
Would RecommendUsed these to build custom sawhorses to match table saw height. Had them set up and wind blew them over, bent the brackets. Added another screw for support and they bent again. Easily bent back, but of course that weakens the product as well. Overall, they work and serve purpose, just not very solid.
Cost effective and handy
Would RecommendEasy to use