Ratings may include incentivized customer reviews.
What Customers Are Saying
The sawhorse brackets were found to be easy to assemble and adjust, allowing users to customize the height and width using different lengths of lumber. However, some customers reported issues with the thin, flimsy metal construction, which caused the brackets to bend or break under moderate weight. Additionally, the leg angle was not wide enough, leading to instability, and the brackets did not properly grip standard lumber, requiring modifications. Overall, the brackets appear suitable for light, occasional use, but may not be durable enough for heavy-duty needs.
Customer review summary generated by AI, including incentivized reviews.Real sawhorses
Would RecommendThis was a great buy I needed two sawhorses so I bought two sets I am extremely satisfied it beets the tar out of the plastic sawhorses you should include the 2x4s to make it the Best Buy out there.
Verified Purchaser
Don’t buy these
Would Not Recommend2x4’s didn’t fit in the leg positions without being beat in with a mallet. The angle of the legs was . minimal. I expected an easier go together but the designers need to actually put it together. Waste of $$$ and I didn’t return them after beating them together
Verified Purchaser
Read above
Would Not RecommendThe product is not well made. In order for the 2x4 to fit they must be shaved.
Verified Purchaser
See above
Lowes had the only saw horse brackets in stock
Verified Purchaser
Cheap junk
Would Not Recommend12 or $13 for a couple bits of very light metal is a rip off. Also, I expected I was buying four connections to make a pair of small horses. Not so!
Verified Purchaser
That’s all
They worked fine for small projects. I think the metal gauge is too light for heavier loads. I needed something more stable for my use.
Verified Purchaser
You need to buy two.
Would RecommendShould be packaged 2 in a package. Who builds one saw horse?
Verified Purchaser
Flimsy
Would Not RecommendThe product is surprisingly flimsy. The metal is thin and easily deforms under load.
Verified Purchaser
Faulty Design, won't work with 2x4 stock lumber.
Would Not RecommendI purchased these (or a better much version of these) some years ago and they were GREAT. But these newer versions will not clamp a 2x4 properly. The dimensions for the legs are fine, but the top part is designed to clamp a board that is 1-1/4" wide, NOT 1-1/2" wide (which is a standard 2x4). I considered ripping 2x4s down on the table saw to 1-1/4" to make these work, but then decided to see what else was available and probably return these. I'll update with what I find.
Cheap made but good for one time use
Would Not RecommendThe sawhorse brackets were thin gauge and bent easily. They are good for one time use go ahead and buy better ones
Needs the be double sets
Would Not RecommendI truly thought they would package these for 2 sawhorses.
Verified Purchaser
Too expensive for what you get
Would Not RecommendVerified Purchaser
DIY sawhorse works as described.
Would RecommendA simple to use solution to quickly assemble your own sawhorses. Must use graded dimensional lumber or cut your rough cut down to size to fit.
Easy to do
Would RecommendQuality product for Medium projects. However I was able to stack almost a whole lumber package for a 12x10 pergola on the saw horses to be stained before Assembly. These braces were easy to use and produce saw horses. I only added the side “A” braces for stronger support at no extra cost because I used the small pieces of 2x4’s I had after cutting the legs to size.
Ll
Have bought on several occasions