Ratings & Reviews for Project Source 0.75-in x 25-ft Birch Iron-on Veneer Edging
Ratings may include incentivized customer reviews.
What Customers Are Saying
The veneer edging product appears to be an effective and easy-to-use solution for covering plywood edges. Customers report that it is simple to apply using an iron, adheres well, and can be easily trimmed and stained to match the plywood, giving a professional, finished look. The key benefits include strong adhesion, the ability to stain and finish the edging, and the transformation of plywood to look like solid wood. While a few customers had issues with adhesion or the roll being stuck together, the overall sentiment is very positive.
Customer review summary generated by AI, including incentivized reviews.Perfect finishing touch
Would RecommendEasy to use and handle. Painted well.
Verified Purchaser
Simple to work with.
Would RecommendEasy to work with! Looks great afterwards!
Verified Purchaser
Makes plywood end grain disappear.
Would Not RecommendWorks as designed.
Verified Purchaser
Good adhesion
Would RecommendAdhered well. Worked like expected
Verified Purchaser
A little practice goes a long way
Would RecommendVery easy to use and clean up. Only a few smaller issues, in lower humidity days the overhang would trim kind of jagged rather than smooth and clean, then when trying to stain or do other finishing things the rag would catch on all those jagged edges and tear/leave fuzzies. On humid days the overhang sliced like butter and looked extremely clean, but the banding itself would be difficult to snap off at the edge of the board. I'm not quite sure how to get the best of both worlds. I also needed a ...
Verified Purchaser
Easy to use
Would RecommendWorked well, easy to use. My iron didn't have a temp gauge but I used a med temp and it worked fine.
Verified Purchaser
Nice Veneer
Would RecommendLooks nice, easy to install, it can be stained.
Verified Purchaser
Good match
Would RecommendNo complaints. The finish and color are neutral enough that it matches a wide range of natural birch finishes.
Verified Purchaser
Confirm the color match for your proj ect wood
Would RecommendExactly what i needed to give panels the prifessional finishing touch.
Verified Purchaser
Birch edge banding.
Would RecommendGreat product, good on easily using a simply iron.
Verified Purchaser
Simple and easy
Would RecommendEasy to work with. Glue could be a little stronger
Verified Purchaser
Great product
Would RecommendWorked perfectly
Verified Purchaser
looks good
Would Recommendcan discolor easily but works well
Verified Purchaser
LOVE!!
Would RecommendThis edge banding stained beautifully and wasn't an obvious color difference from the wood my china cabinet is. Will definitely buy again!
Verified Purchaser
Worked well.
Would RecommendEasy to use.
Verified Purchaser
Layers glued together!
Would Not Recommendhot melt glue had stuck all the layers of the roll together. Not able to unwrap more than 5 inches without splitting the veneer. I was able to use it for my project because I only needed 1/2" wide and short lengths. But most of the veneer was garbage. Check the glue before buying.
Verified Purchaser