Ratings & Reviews for OPTIX 24-in x 48-in 7.12-sq ft Prism Ceiling Light Panels

The product is fragile and isn’t stored safely, s.

Every piece on the shelf that was what I needed, was broken.

Read the Measurements Before You Buy

The website says they sell 24”x48” panels but they ones at the store are smaller (23.25”x47.75”). So they were too narrow for my needs.

Fluorescent lighting

Replace my Fluorescent fixtures with LED's and replaced the yellowed panels that were 30 years old, These are non-yellowing.

Do the job

These aren't fancy or stylish, but they do the job. If you need to cut it, measure twice, wear eye protection, go slow, use a tool designed for the job.

Brittle, not true to size

Although I knew it would be cheap material due to the price, I didn’t realize it would break the minute I lifted it up to install it, also it was supposed to be 24” x 48”, it was about 1/2” short on both sides. Don’t waste your time or money.

THEY CHANGED THE SIZE

I tried to put this in my bathroom overhead sky light. IT DIDN'T FIT! They made the length and the width 2 inches SMALLER. WHAT??? WHAT? I going to pull all the tiles down put-up all new tiles two inches smaller? You better think again. I just go to a reputable store that has the 48 times 24 inches real Light Panels and buy them there. They should give you a choice whether you want to buy the big panel(48X24) or the new SMALLER PANEL(46X22). They always changing products for the WORST AND ALWAYS...

Ceiling Lighting diffuser

LED LIGHTING diffuser is very brittle and difficult trim . Bought 2, destroyed 1 to get one good one!

Hopefully it last

Cheap quality broke 2 just trying to put into the drop ceiling !

The light cover broke / cracked the frost time and had to replace it. It cracks to easily . But was the only size that would it are light so we had to get that style.

Not 2x4

Be sure to measure before buying. It is not 2x4, not about an inch shorter. I still made it work, but not very happy.

not right size

it says its 2 x 4 its really 22 x 4 will not work in 2x4 its labeled wrong

Panel difficult to cut

Would only recommend this panel and cutter for someone experienced in cutting panels. We had a hard time getting a consistent depth cut with the supplied cutter. Consequently it was difficult to bend and create a straight cut.

Plastic Prism ceiling light panels-white $10.00 ea

These panels are very difficult to cut to size they are very brittle and crack very easy. I am not sure if there is a certain tool used to cut these with but i had a very hard time cutting them. If you are using them without having to cut them they might be ok but you still need to be very careful when installing as they are very brittle and will crack.

Impossible to cut

Followed the directions from the video. Both panels I tried DID NOT snap along the line I scored almost all the way through the panel. They both just randomly snapped however they wanted. Absolutely impossible to work with correctly.

Optix Panels

I had no problems installing this product. Very flexible with no cracking, chipping or other issues mentioned in other reviews. Easy to score and cut with an industrial razor knife. Would buy again.