Ratings & Reviews for Kobalt 2 -Piece 7/64-in 2-3/4-in Titanium coated HSS Jobber length Twist Drill Bit
Ratings may include incentivized customer reviews.
What Customers Are Saying
Most customers praise these bits for reliable performance and value, noting they drill cleanly through wood, aluminum, and composites with sharp, consistent results. Many highlight hex shank compatibility and suitability for pilot holes and routine tasks. However, a substantial group reports unexpected breakage, particularly when drilling hardwood, aluminum angle iron, or Hardie board, describing the bits as brittle and unsuitable for impact drills. A few mention length or price concerns. Overall, reviewers find them dependable for standard applications despite durability inconsistencies under demanding conditions.
Customer review summary generated by AI, including incentivized reviews.Nice Cost/Product
Would RecommendLike the two pack. Cost was okay. Will have to see how long before they break.
From 2 -Piece 1_SLASH_16-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Not durable
Would Not RecommendNot very durable.
From 2 -Piece 1_SLASH_16-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Low quality
Would Not RecommendThe third time using the bit broke in half. I was drilling into wood. So very surprised. It wasn't more durable.
From 2 -Piece 5_SLASH_64-in 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Don’t buy it, it’s not titanium
Would Not RecommendI tried to drill a piece of plastic fence and it broke right away! Titanium bit I don’t think so!! Lies and a ripoff!!!
From 11_SLASH_64-in 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
11111111
Would Recommend111111
From 2 -Piece 1_SLASH_16-in Assorted 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Dont buy if you drilling metal
Would Not RecommendNothing
From 3_SLASH_16-in 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Drill bits that work as drill bits are supposed to
Would RecommendI like the fact that they drill holes as advertised.
From 2 -Piece 5_SLASH_64-in 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Very brittle
Would Not RecommendThe bits are very brittle. Already broke both of them just drilling through studs. Also the aluminum base makes them wear quickly. If you use a magnetic angle head for getting into tight spaces the bit will fall out due to it having the aluminum base
From 3_SLASH_16-in 3-3_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified PurchaserVerified Pro
Good but not strong enough
Would Not RecommendSnapped after a few uses
From 9_SLASH_64-in 3-1_SLASH_4-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
All impact bits should be 2"
Would Recommend2" depth allows alignment pilot through standard 2x4(6,8...). If you need to use sheetrock anchors it helps if they're aligned properly. 1 Drill and install one anchor. 2 Attach board you want to mount. 3 Drill remaining (pilot) holes. 4 Remove board and install anchors. 5 Mount and attach board.
From 2 -Piece 1_SLASH_8-in 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
NO MORE Kobalt drills!
Would Not RecommendI've had too many of these Kobalt drill bits break under conditions when very little pressure is applied in soft wood and they are almost brand new. It's like they're made of glass.
From 2 -Piece 1_SLASH_8-in 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit
Lack of inventory
Would Not RecommendI had to settle for this product because what I really needed was out of stock
From 2 -Piece 3_SLASH_32-in 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser
Did the job
Would RecommendIt worked well.
From 2 -Piece 3_SLASH_32-in 2-1_SLASH_2-in Titanium coated HSS Jobber length Twist Drill Bit Verified Purchaser