Ratings & Reviews for IRWIN Marples 1-3/8-in x 3-11/16-in Woodboring Forstner bit Drill Bit
Ratings may include incentivized customer reviews.
What Customers Are Saying
The product appears to be a high-quality drill bit that performs well for various woodworking tasks. Customers praised its ability to create clean, smooth, and precise holes, even in hardwoods. The bit stayed sharp through multiple uses and could withstand cutting through nails without dulling. However, some customers experienced issues with the bit wandering or binding in the wood, especially when drilling deeper holes. There were also a few reports of mislabeled bit sizes. Overall, the majority of reviews were very positive, highlighting the bit's sharpness, durability, and ability to produce high-quality results.
Customer review summary generated by AI, including incentivized reviews.I would buy again if I needed
Would RecommendIt drills a nice clean flat hole but it is slow , every drill bit whether spade bits forstner bits their slow but they make a smooth hole. I'm making a project that needs smooth bottom holes.
From Marples 1-1_SLASH_2-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Not good if you’re looking for something precise
Would Not RecommendBought two of these at the same time and the diameter of the holes drilled by the bits are off by about 1/8” from each other.
From Marples 1-1_SLASH_4-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Size is incorrect
Would Not RecommendWhile I genuinely like Irwin products, this one was extremely disappointing. The size was off by 1/8” dispite being label as 1-3/8” 34.9mm. The actual measurement was 1-1/4”. Others on the site verified the mislabeling, both on the package and the incorrect marking on the shank of the forstner bit itself. Just wish I checked before I set up my cabinets work. Going to another place tomorrow and buy another brand. Can’t trust Irwin any longer. PS: IRWIN Customer Service, please don’t ask m...
Thank you for taking the time to provide your feedback. Your feedback is valuable as we take into consideration every piece of feedback that we come ...
great bit for accurate hole cutting
Would Recommendvery sharp and accurate cuts
Verified Purchaser
Hold the piece of wood still with clamps as needed
Great bit. Worked as described
From Marples 1-1_SLASH_2-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Irwin dont waste your time.
At first i thought this was a great forstner bit. Untill i tried the Diablo. The irwin was not cutting as clean as it could. Diablo is way better
Verified Purchaser
Hello Jared Thank you for your feedback regarding the drill bit model number 1966933. I am sorry to hear you are unhappy with this product and would...
Keep up the good work
Would RecommendMounted onto a press drill and item worked great!
From Marples 1-1_SLASH_2-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Keep up the good work
Would RecommendMounted on press drill and Item worked great!
From Marples 2-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Not the best
Would Not RecommendThis is nowhere near the quality of say...a Milwaukee...
From Marples 1-1_SLASH_8-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Hello CC BIRDHOUSE LLC and thank you for your feedback on the 1966931 IRWIN Marples 1-1/8-in x 3-11/16-in Woodboring Forstner Drill Bit, your feedbac...
Bit works like a charm
Would RecommendGreat quality forsner bit, used it to drill out cabinet doors for hinges. Well worth the money!
Verified Purchaser
Useless
Would Not RecommendThe bit would not go through some hard wood that bought it to use on. Extremely disappointed. Barley worked on cedar. 👎🏻
From Marples 1-1_SLASH_4-in x 3-11_SLASH_16-in Woodboring Forstner bit Drill Bit Verified Purchaser
Hello.
Thank you for your feedback regarding the Drill bit. I am sorry to hear you are unhappy with this product and would be more than happy t...
Maybe ok for soft wood but not for hard wood
Would Not RecommendDrilled 14 1/2" deep holes in oak which went ok as long as you are patient. Had to sharpen the bit to get through 7 more holes. Have been unable to adequately re-sharpen to continue using it.
Hello, appreciative customer Thank you for taking the time to provide your feedback on the Drill bit (Model #1966938) and I'm sorry to hear about...
It can get destroy if it hits a nail inside a wood
Would Recommendvery strong and reliable for cutting wood , a longer shaft would be better
Verified Purchaser
The item matches the description
Would RecommendThis is a good product for the price, the blades dulled relatively quickly which is why it’s always better to buy more than one fostner bit. I haven’t found any better brands yet. This has been the one to last the longest so far!
Verified Purchaser
Hello Bren, I appreciate your feedback on the IRWIN Marples 1-1/4-in x 3-11/16-in Woodboring Forstner Drill Bit 1966932 and I'm sorry to hear 2 o...