Ratings & Reviews for Fas-n-Tite 1-1/2-in 4d Galvanized Finish nails 599 -Per Box

Good Finishing Nails

I found these nails to be good for updating my basement.

great finish nails for exterior wood trim

while refinishing and painting the exterior wood trim on my house, I discovered a lot of corroded nails used by the builder. they used smooth shank untreated steel finish nails and many of them pulled out and left rust stains on the wood. these finish nails have a gripping shank, and are galvanized to prevent corrosion. They are small nails, but had enough bite to draw my separated corners back together. GREAT PRODUCT!

galvanized nails

little thin, but the right length. bent a few driving them in but overall worked well enough

Good nails

Standard galvanized nails. Would have gave it 5 stars but quite a few of the nails were clumped together in the galvanizing solution and couldn’t be separated or used.

Very good results.

For this product, I recommend (for right handed people) - grasp nail with the left hand, lightly but straight against whatever you wish to join. That is place the tip against it and preferably hold in a manner other than with the thumb over the top. Tap with a hammer and remove the left hand from the nail. Impact the head of the nail with the hammer with a firm contact until the desired penetration is achieved. The product works great when the above instructions are followed.

Works as advertised

No issues with these nails, no bending, hold up to moisture.