Ratings & Reviews for Freedom 4-ft x 8-ft Better Than Treated Vinyl Privacy Lattice

White Privacy Vinyl Lattice (Common: 0.2-in x 4-ft

Bought the lattice to make a skirt around the edge of my storage shed. Worked well and cut easily with circular saw. Need to ensure you adjust the saw blade depth to an 1/8 more of the thickness so that the blade cuts evenly with out any chips. To much blade will chip or break the plastic. I used a combination saw blade that came with the circular saw. Fastened the lattice to the storage shed with 1 inch white panel nails.

Good product, a little pricey.

Very nice looking, easy to transport and cut with a fine tooth circle saw. My only gripe is that it was nearly twice as expensive as the non-privacy version of this product.

White Lattice

Easily cut and used for skirting around a storage shed. Looks great!

Poor quality, cracked within 8 months

I followed the instructions to the tee and drilled oversized holes to mount my lattices. I even used the recommended screws to mount them onto my fence. I also did not tighten the screws completely to allow for expansion. As you can see in the picture I attached, the oversized hole isn't big enough to prevent the lattice from contracting during 32F weather. This products expands and contracts too much. I live in Arizona, and during the peak of summer the product would expand and the whole latti...

What I needed

Was perfect to give privacy to the deck from the road. You cannot really cut it to size though but it worked.

not as good as it was a few years ago

you raised the price and made the product thinner I bought it because it matches my old lattice in color but it is thinner and cost more I hope it holds up

I love not painting!

We've had this installed on our front porch for 2 years and it looks like it did the day we bought it. No painting, no maintenance and no aging. Great product!

Most Flexible Lattice Ever

I ordered 2 - 4X8 pieces online, to be shipped to my store, and was surprised to find both were rolled up together in a small box. I just put them out on the driveway, in the sun for about 20 - 30 minutes and the lattice easily laid back out flat to my surprise! It was very easy to hang, and looks super when finishing the edges with the clay colored molding!

1X1 white vinyl lattice

Product is easy to work with: Can be cut with a circular saw or jigsaw. I recommend using a plywood blade in the circular saw or a blade specifically for plastic in the jigsaw. Use the recommended screws and installation is a breeze.

Privacy trellis

I purchased the privacy vinyl lattice to make a trellis for my clementis plant. I wasn't sure if I could get it home on the roof of my car, but two Lowes associates discovered you could roll it and tie it. The rolled it up and put it in the back of my car. Thank you Lowes.

Looks Great

Was very easy to work with and cut to desired size. Looks great up and should last along time

Worked perfectly for what we wanted.

We bought it so we could make a privacy area for the grill.

Not worth the money

We bought the vinyl lattice thinking it was so great. We wouldn't have to worry about up keep and would only have to buy in once. What a mistake. In the summer months the lattice bows and boils and looks really bad. In this past winter, every time the wind blew it would crack were the screws were holding it in place. We tried reinforcing it and added more screws, but still kept braking. We ended up taking it all off . We now need to have the carpenter come and redo the job.