Ratings & Reviews for Deck Plus #10 x 2-1/2-in Wood to wood Deck Screws 73 -Per Box
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers overwhelmingly praise these stainless steel screws for exceptional corrosion resistance and strength in outdoor applications like coastal decks and marine environments. Most highlight reliable performance in harsh, wet conditions without rusting or tarnishing over time. Many appreciate the self-tapping design and compatibility with impact drivers, noting they drive smoothly without pre-drilling. However, a notable minority report frequent head stripping, particularly with the T25 Torx drive, with some experiencing 30% failure rates before full installation. Despite these quality inconsistencies, most customers consider them dependable for demanding outdoor projects.
Customer review summary generated by AI, including incentivized reviews.Strong Screws
Would RecommendWe drove over 700 of these on a deck overlay project and didn’t twist off a single one.
From #10 x 2-1_SLASH_2-in Wood to wood Deck Screws 365 -Per Box Verified PurchaserSweepstakes
Broken Screws
Would Not RecommendWhile using these in pine, every 3 screws or so would snap in half as I was putting them into the wood.
Strips Easily
Would Not RecommendThe heads strip out too easily vs their ceramic screws. They work if you have to use them but if you have a choice go with something else.
From #10 x 3-in Wood to wood Deck Screws 62 -Per Box Verified PurchaserSweepstakes
Thank you for providing us feedback on your product experience. We apologize that the product did not perform to your expectations and we will contin...
Terrible screws avoid them
Would Not RecommendThese deck screws are terrible. The heads cam out, heads snap off. I bought a 5lb container & used half for my deck spindles. The spindles were only an inch thick & these screws could not handle the job. I threw the rest in the recycle bin where they belong. My suggestion is spend the extra money on a better screw, I ended up purchasing GRK screws for my deck boards & they worked flawlessly. They cost a lil more but I have piece of mind. *****You’ve been Warned!****
From #10 x 2-1_SLASH_2-in Wood to wood Deck Screws 365 -Per Box Verified PurchaserSweepstakes
Thank you for providing us feedback on your product experience. We apologize that the product did not perform to your expectations and we will contin...
Easy to work with
Would RecommendThese screws are better than some other ones I've used in the past
Verified PurchaserSweepstakes
Best with impact driver
Would RecommendUsing these in a fence building project. Using a power screwdriver I was initially disappointed. Despite claims on the box, the T25 sockets on the screws stripped quite easily (despite drilling pilot holes). After I switched to an impact driver they worked much better.
Has a larger head then other stainless steal screws
From #8 x 2-in Wood to wood Deck Screws 125 -Per Box Verified PurchaserSweepstakes
Use caution
Would RecommendThese screws are stainless steel. Not heat treated, therefore soft. They have a T30 head. So it’s very easy to twist of the heads in even moderately tough material. Drill pilot holes and all should go well. Just don’t treat them like a deck screw. The manufacturer chose rust resistance over strength.
Thank you for providing us feedback on your product experience. We apologize that the product did not perform to your expectations and we will contin...
Great screw
Would RecommendStarted building a fort for the kids, used these to put together the walls and roof. No shearing, no stripping, worked great!
Verified PurchaserSweepstakes
Thank you for providing us feedback on your product experience. We apologize that the product did not perform to your expectations and we will contin...