Ratings & Reviews for Deck Plus #10 x 2-1/2-in Wood to wood Deck Screws 73 -Per Box

t25 screw

Good stiff screw. T25 head is less cam-out prone than most Philips. T25 bits are a pain.

8 x 2-in stainless steel wood screws

Used to install PVC Garage Door Trim worked out great and looks good

Stripped out torx head.

Used on pressure treated wood predrilled and still stripped out torx head. The stainless in these is much to soft. Never buy again. Will try the more expensive other brand next.

terrible

I completed most of my project using similar screws from the other major store. When I ran out I made the mistake of purchasing these screws. They just do not compare. The heads would strip on about 30% of the screws. Then it was impossible to drive the screw fully home or even retract it. Actually, after inserting about three screws, the drillbit they provide you with, was covered in metal furrings. Metal that was stripping from the head of the screws. In my opinion, the screws are not fit for ...

Junk

I have never in my life had a stainless steel screw that was as soft as these screw. Will not even hold a bit without stripping out. And at least 3 out of every 10 screws were bent so bad they could not be used. Absolute garbage.

Drilled pilot holes for Adirondack chairs and these stainless steal screws snapped off the head on 3 different screws....left trying to figure out how to unscrew the broken screws on the back rest. Not pleased at all with these. Taking them back to Lowe’s tomorrow to see if I can get my money back

Some of the worst T-25 deck screws I’ve used

If you don’t mind the star bit heads stripping all the time these are for you. The fittment with a GRK T-25 bit is horrible. Don’t waste your money.

Unfortunately...lowes in EP doesn't carry these...so one must wait 7 or 8 days for them to NEVER SHOW UP IN THE MAIL

Stainless steel screws

Very good quality screws for outdoor use where moisture can be a issue. The quality of the screw shows when you drill them in. Not a single one striped or broke.

Not worth the money

Thought that I was buying a durable screw to us in a high corrosive environment. But what I ended up with was a mess the heads would stripe easily, the screw would bend like crazy, and every once in a while you could actually get a screw to go in all the way.

break easily

Heads broke off on multiple with moderate force applied. Poor quality/material.

These screws have the wrong job.

THese screws are the worst I have delt with in years.... They would be better off employed at the seedy place down the road rater than in any serious project. My experience has been that torx screws tend to be more resistant to stripping than phillips screws... this is not the case for these! I purchased a 5lb box and I am going to throw away 4lbs of them due to the fact that these strip out 90% of the time. Soft!

poor quality

This batch of screws were defective. Every screw, in the box, that I tried to use stripped out and required extensive, frustrating, and time-consuming extraction with plyers. Other Deck Plus screws (2" and 3") worked fine/great. After opening the package and trying a few, I did not think I could return them...

Poor excuse for a deck screw

I made the mistake of ordering 2 boxes of these deck screws. I am using them for a dock because I wanted the Stainless Steel to help with the rusting of the screws. These screws have the star head and strip worse than any screw I have ever used. I can not believe I paid extra for a product that is so poorly made. Of the 100 screws I used today I would estimate that 50% stripped. Several I was not even able to screw completely into the wood decking. I will be working with Lowes to return th...