Ratings & Reviews for Deck Plus #10 x 2-1/2-in Composite Deck Screws 75 -Per Box
Ratings may include incentivized customer reviews.
What Customers Are Saying
Customers praise these screws for their excellent color match, low-profile design, and seamless blending with composite decking, delivering a clean, professional finish. The Torx-drive design and smooth coating make installation easy for most users. However, a substantial group reports consistent head stripping during installation, even with pre-drilling and proper tools, with some experiencing 30% or higher failure rates. While many succeed with correct technique, the reliability concerns and inconsistent quality control remain a significant drawback for a notable portion of reviewers.
Customer review summary generated by AI, including incentivized reviews.Good Deck Screw with One Flaw
Would RecommendThese are good deck screws for composite decks. The thread pattern allows the screws to drive through the deck boards and below the deck board surface. Two things led me to give four stars instead of five stars. First, pilot holes are needed (unless you want to spend a lot of time trying to get the screw to "bite." Two, about one percent of the screws had their heads break when driving deep into the boards - especially when backing out screws. Overall, I recommend these screws.
From #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Almost Always Strips
Would Not RecommendThe color matches the decking (Trex Foggy Wharf) sufficiently. They appear to be well coated. Don't try to drive these without pre drilling. The WILL strip out. A total waste of time. I have never had deck screws that were allegedly designed for composite lumber strip out. The description says that you don't have to pre drill; good luck. I thought that the bit included was junk but my own T20 bits did the same. Do not buy these to save time; you will most certainly need to pre drill. I c...
Highly satisfied
Would RecommendLowes efficiently handled the online sale to my great satisfaction
Verified Purchaser
Minor design flaw?
Its a screw but when using them I felt that it created too much vinyl garbage at the top of the screw which frequently prevented it from seating properly. This is generated by the reverse threads intended to prevent mushrooming. Perhaps the pitch on that portion of the screw could be improved. In any case there were a number of times when the screw would not seat and I was forced to back the screw out to remove the glob of melted plastic from the top of the screw and then put the screw back i...
From #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...
heads strip before even half way in
Do not buy these if you don't want to spend hours fighting them. I tried multiple bits and drill/drivers and even pre-dilling but no luck. about 1 in 3 would strip out. Finally gave up and bought different screws which went in without issues.
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...
Quality product
Would RecommendWorked great, prefect match for the decking.
Verified Purchaser
Special screws for use with composite material
Would RecommendScrews worked as they should but the reverse threads on the upper shank of the screw seem a little too course.
Verified Purchaser
Good screw for composite deck insulation
Would RecommendInstall very good into composite deck boards
Verified Purchaser
Multiple uses
Would RecommendUseful for attaching stair treads to stair stringers
From #8 x 1-5_SLASH_8-in Composite Deck Screws 147 -Per Box Verified Purchaser
Work great
Good quality
From #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Pre drill
Would RecommendNice screws, not self startimg has suggest. Pre drill for best results.
From #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Exactly what we needed
Would RecommendFrom #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Great Product
Would RecommendHad to use a 5/32 bit to predrill holes but that worked great.
From #10 x 2-1_SLASH_2-in Composite Deck Screws 375 -Per Box Verified Purchaser
Hello, We’re sorry to hear that this product was unsatisfactory and did not meet or perform to your expectations. We will continue to monitor product...