Ratings & Reviews for Valspar High-gloss Pink Burst Oil-based Spray paint and primer in one ( NET WT. 12-oz )

Still not dry

This paint will not dry. I've painted many video game consoles with other brands and been able to reassemble in about 48 hours. But not with this paint I've had the shells I painted in a dry room for over 48 hours and its still tacky. The humidity in the room is around 30% and the temperature is around 80°F. Any other paint would have been completely dry by now. Only chose this paint for the colors but that may have been a mistake.

Terrible trigger

New trigger was difficult to push, had to use thumb and hold with both hands as it was awkward to use. I purchased an aftermarket trigger spray can adapter years before that can't be used with this new design either. The spray from the can did not come out very clean either. It was all over the place so i had to keep the can just a few inches from my project or waste paint in the process.

Bad coverage

Painted a wicker nightstand, immediately paint began chipping off once a lamp (with a felt bottom) was paced on top. It took 1.5 cans to achieve a mostly uniform color, but there is still white showing through. My hand is weak from the poor ergonomics of the spray design. Liked the color but there's no point in using this product if it's going to chip right away. Will definitely not buy again.... I'm going to look into getting a refund.

Valspar clear flat

Read some negative reviews on the clear flat topcoat. They mentioned whitish color, rough textured, spits and sputters . I purchased two cans and first tried it on a sample piece to top coat over a flat black finish. Came out exactly the way I want so started on my cabinet piece. Started out fine but then I started seeing what looked like sputtering and spitting as mentioned by others and I also got whitish looking areas.

Car Repaint Project

I originally bought this paint to repaint a lower bumper repair, but the match and appearance was so good, I decide to repaint the entire car, whose original paint was very oxidized and faded, and had been touched up many places over the years. I sanded the original finish, cleaned it with paint remover and lacquer thinner, masked everything off, and put 2 full coats on after going once over the high contrast prior repair areas. The car looked awesome. Sold in 3 hours. I can't seem to upload pho...

Valspar Premium Finish

I like Valspar Premium Enamel Fast Drying spray paint. Because of a color selection I bought a can of Valspar Premium Finish Micromist Spray paint. This Valspar Premium Finish Micromist Spray paint is horrible. It sprays all over the place and does not cover unless you go over the work many many times. It does not dry to handle in 1 hour as the can says. It has a really intense smell. The spray nozzle is terrible. It make your finger hurt. This paint needs to be taken off the shelf immediately.

Large Finger Pad

The large finger pad is more comfortable, but that is of no use when the spray will not come out. If the whole can is not used the first time you use it, you may as well throw the rest away because of the last 3 cans I have used I have had to dispose of approximately 90% of the paint because it will not spray after it has once been used.

Never cures

Even though it stunk to high heaven and the thick lingering smell permiated every room in the house I was very optimistic regarding the results. the color was excellent...But I've been waiting a month, in the dryest room in the house, under a going fan for this to cure...still tacky to the touch. This is ridiculous! NEVER AGAIN!!!!

This paint will not dry.

It's been about a week. I used it on a guitar body, alder. It indicates on the can it is for metal, wood, and plastic. The paint refuses to cure. I love the color, but I cannot re-assemble anything until the tackiness goes away. And it won't go away. I have heard similar things from other "luthiers" that have repained guitar bodies with this paint. I wish I had heard from them before painting the electric guitar.

Very Disappointing

I bought 5 cans of the Valspar Premium Finish with Micromist Spray to repaint a vintage metal kitchen cart. I could not be more disappointed. I am a big do-it-yourselfer, and this is not my first time painting something. I followed the directions specifically, but the micromist spray simply does NOT cover. I spent days applying light coat after light coat in order to cover, but it never dried. The pieces are now thick with paint and tacky. It is not as advertised as it does not "cover easily and...

Terrible Spray Technology

The color and quality of this paint was great, which is why it has 2 stars and not 1. I would give it five if the spray can were not so AWFUL! The paint comes out in a misty cloud, and even holding the can 8 inches or less from my project, less than half of it made it onto the wood. The site says a can is supposed to cover 24 square feet. I barely got that far with 3 cans and had to return to the store to purchase a lot more. It was not windy and I have experience using spray paint. The value se...

Do not buy.

I loved the color option and the price point for this paint. Unfortunately the spray cans leave a LOT to be desired. The micro droplet spray creates a LOT more overspray than normal spray cans, making masking more difficult, making build-up on the already-painted surfaces greater(near impossible to get consistent texture that way) and putting more paint in the air and less on the project. Liquid paint builds up on the "easy lock" cover and then gets splattered onto the surface in large drops, ma...

spray paint

I bought 2 cans and both of them were impossible to spray with my finger. I had to use my thumb and hold the can with both hands and it was still hard to press down on the finger pad.

"sprays at any angle"

I bought the flat black product and it worked perfect for everything I needed in my study model...except for one thing...my final model. I think the spray nozzle technology was designed for graffiti artists who might, on occasion, have the need to spray upside down. I do not have the same need, BUT I do need to use the entire can, not just the first third. If it sprays at any angle, how exactly are you supposed to clear the nozzle to reuse that remaining paint at later date? The can has no post-...

Very Good Product

I have purchased a number of different brands of spray paint from the cheapest store brand to the most elite of rattle cans. So many reviews claim that drying time is an issue and I too have discovered this. As well I have encountered with every can of Valspar that the propellant drops in velocity to an unusable state at about 25% remaining in the 340g rattle can resulting in sputtering and splotches. In my circumstance I do custom firearm refinishing and utilize rattle cans quite a bit. I typic...

Sputters and spits

I bought this clear flat microspray to finish a diy paint job on my motorcycle. The can sputters and spits all over and leaves large globs instead of an even coating. Also, I'm curious as to why the product leaves a fine white residue that can simply be wiped off ours after the paint job? What's that all about?

Bad can's

The last 4 time's I have spray painted project's the paint can stop's working right in the middle of the job,once I can understand but 4 time's give me a break. Right now I am very aggetated I am going to take it back and hope they will exchange it,the job is not done and I have over a half of can left and nothing come's out.

Smooth

I have used several times it sprays smoothly and covers well. Find it best to do 2 light coats

hard to use

I FIND THAT IT IS VERY DIFFICULT TO SPRAY THIS CAN,MAKING IT IMPOSSIBLE TO GET A SMOOTH COAT OF PAINT. i ALSO USED A CAN OF THE FLAT SEALER AND RUINED A PIECE OF FURNITURE i HAD PAINTED. aND THE WAY THE CAN IS MADE i CAN NOT USE A HANDLE ON IT TO MAKE IT EASIER TO SPRAY. wILL NOT BUY THIS AGAIN. sHAME TOO, i LOVE vALSPAR PAINT AND USE A LOT OF SPRAY PAINT.

covers great with less pa

I am so happy that i chose this brand compared to the less expensive one. I saved money due to it took less paint.