Ratings & Reviews for Rubbermaid 7-ft x 7-ft Roughneck Gable Resin Storage Shed (Floor Included)

Looks good and is very useful

This is a good product that is very easy to put together. My wife and I assembled this in two hours without any fights! We actually used a YouTube video as the directions are a bit confusing at times. The quality is really good but if the product has not been stored properly at the store you may have some issues with putting in the walls and roof as we did. But a soft mallet works great to help snap pieces together . I also received a broken window but the Lowes group had a Rubbermaid representa...

Poor fit for assembly

"Interlocking" panels did not fit together smoothly, causing uneven joints. Wall panels did not "snap" into floor panels as illustrated, and no obvious place for them to "snap". Grooves in floor panels lacked lip formed on bottom on bottom of wall panels that would allow locking fit. Hence, building is not attached to floor.

Very Nice Shed

This shed is perfect for what I needed it for, and thats storing my lawnmower and a few other yard tools. Me and two of my friends put it up in just over 3 hours. There really was no hang ups putting it together except for the roof. At first it didnt want to line up correctly, but with a little pulling here a some pushing there, it ended up going together quite nicely. As far as punching out holes and stuff that a lot of people on here complain about...if youve got someone helping you its not ev...

Could not assemble Sides A & B, Returning to Lowes

After many hours of trying to assemble Sides A & B, they simply will not go together. Since there is no video, or other detailed description of how these sides are supposed to interlock, we packed the entire shed back into it's box and called Lowe's to come pick it up. The design of these sides must have changed, as we could not find an instructional video that demonstrated the issue we were having with not being able to lock Sides A & B together. Several phone calls to Rubbermaid resulted in su...

Sturdy replacement shed

We built this shed to replace an old metal shed that is WAY past its prime. There were 4 people working on construction. I'd guess it took a total of 6 hours to completely assemble everything. Nothing was incredibly difficult, there were simply a lot of screws and steps. We did run into a bit of trouble: *Not everything lined up perfectly. Setting the wall panels up, we noticed that the shed bows a little bit. Not enough to allow water to leak enough, but noticeable enough to where you can see...

Roughneck Storage Shed

Appears to be a good product once completed. Does require more than two helpers to assemble. Instructions are vague and takes a little more time to understand. Some of the hardware was missing but a trip to the hardware store and problem solved. Like other reviews, it does help to start with a level surface!

Not the best but does the job

Prepping all the pieces first will save you some headache and frustration. There is a ton of prep work! As with almost every shed, a perfectly flat place to build it and keep it is not negotiable! Took myself and a helper the better part of a day to assemble.

Easy Assembly!!

My wife and I put the entire shed together in 4 hrs. I have assembled many sheds over the years, and this was the easiest one I have ever done. I did spend some time building a flat and level deck to put it on. The deck extended out over an embankment. We can walk from the parking area to the shed and get all of the lawn tools easily. It really feels solid for a plastic shed, and I was impressed with how easy it was to assemble. Two People make it easy to assemble, as one can hold parts in place...

worse purchased ever

the package had 3 "b" panels and 1"a" panel . I called R. customer's service. The lady I spoke with was very rude. I went back to Lowes and they changed the panel with me. I will never buy another Rubbermaid product.

Good shed for a good price

This is a roomy shed, and is not hard to build. Give yourself several hours, and have a helper. I built a base out of 2 x 4's, which is placed on cement blocks. My yard has an incline, so I could not get it completely level without it being propped up too much on one side, but it still works great. Plenty of room for everything, and does not leak. Watch the price as it regularly drops by $100 to $549!

Overall a great product for the money!

Excellent quality for a reasonable price. I created the foundation from large concrete blocks. Everything went well until doors would not shut. A word to the wise - if you have this issue, check verticality of the front walls using a level and then prop them straight with a brace (e.g., 2X4). Then look at REAR corners; if one is elevated, that's your real problem area. Simply shim that corner to fine tune the doors and you are set! Now I'm storing lawn mower, pressure washer, wheelbarrow, chains...

Nice shed

My only complaint is that the roof panels required a little finagling and some colorful language. Make shure your site or foundation is completely level or one door won't shut and the other will fall out. Great shed for the $, installed in about 2 hours, not including building a base.

Only takes 2 hours to assemble.

The product was very easy to assemble. My boyfriend and I are both little people and we put this shed together in 2 hours. We had to use a ladder for most of the assembly, so that slowed us down a lot. We should have called some tall friends to help us with the roof. The directions were easy to follow and all of the parts were clearly marked. We poured a concrete pad for under the shed and would recommend doing that. It seems to be durable, but only time will tell if it will withstand Iowa winte...

Roughnecy storage shed

Be sure the installation surface is perfectly level or you will have problems.

ONLY REVIEW YOU NEED TO READ- HONEST TRUTH!

Ok so 3 people put this shed together. It took over 3 hours for the shed itself - and 4 hours to level the ground. One handyman person (who does construction for a living) and two regular home owners. Now, if you are putting this together on a flat concrete or wood platform then I am sure you will be fine. However, if you are putting it on the ground like what we did - BEWARE. No matter what you do the pieces will warp when not in use. The holes were not lining up and were not cut correctly at t...

Good for the cost

The shed installation process was pretty straight forward. The initial process of the floor and walls went pretty quickly but when the installation of the roof started, we had some issues with parts lining up. We had to push and pull pieces to get them lined up but with some elbow grease, we were successful. Overall it was a good value but it is definitely a two person job to set it up.

Fast And Easy Assebly

This is a great shed for the money I would recommend building a base floor as i did overall it took about 5-6 hours including building the wood floor base. very easy to build just follow the instructions and you got it! great value and addition to the home... would defiantly buy this product again.

Good Product

This shed has alot of screws in it. If the directions are not followed exactly step by step, you will do double the work. Also, the shed has to be on level, flat gound otherwise, the parts don't fit together correctly.

Large, good quality, durable, storage shed.

I checked the ratings on other less expensive sheds and know there are other options out there, however most do not allow enough space for me to stand up inside and this one does. There is also a metal frame supporting the roof adding to its durability. This does take up some space in your yard and you will definitely need help loading it up in your truck, but not too worry, the staff at the store helped me get it loaded, so do not be intimidated by the size. Once I got it home, I took it out of...

Very good product

Our new Rubbermaid storage shed was easy to put together. The only problem I had was with the upper door lock. There is no hole in the steel rail for it go go into when you close the door and try to lock the top lock. The only other thing I noticed is that the surface you put it on needs to be perfectly level or the doors won't close without dragging on the top of door opening.