Ratings & Reviews for Richelieu 20.0-in Side Mount White Drawer Slide 55.0-lb Load Capacity 2 -Pieces

Drawer slides

I built my kitchen cabinets 45 yrs ago and used these slides. In all those years there are only some minor changes made to them. The replacement fit was perfect. In all those years only one slide roller needed replacement. And the drawer was the utensil drawer that gets open 30-40 times a day. Not bad at all. I might have paid $2-3 for them back then. Now they were around $7. Cheapest slides they had. I highly recommend them.

Uneven tracks

The right side is slightly smaller than the left one by 1/16 inch. You have to compensate when installing them.

Good replacement

Fit on my old drawer with minimal to no difficulty. I DID have to change both the rails and receivers due to the wheel size, but overall, a good product!

Great product

Well made with all needed hardware except brackets for cabinet back. Nice finish, smooth operation, and strong enough to hold heavy pot and pan set with lids.

Have to be care on length you buy and they go in easy

Easy assembly

I fixed a neighbors broken drawer with this simple to install cabinet drawer brackets. Self explanatory but directions were included. Such an easy fix and good value to fix the drawer.

Great equipment

The wife wanted another drawer in a cabinet. I picked up a pair of these, built a drawer and installed it using these drawer slides. They worked perfectly, and the drawer glides in and out with ease. Would recommend them.

Replaced Drawer Slides

The wheel had broken off the existing kitchen drawer slide and this was very easy to replace. Drawer now slides like a champ !!

Great Value

I bought these because of the price. There were other 20" slides for twice the price. These installed easily and are holding up just fine.

Slidders

I got theses to replace the ones on my trash can and they work.

You get what you pay for.

They work just fine. When building drawer boxes I would install the glides before determining box width. I allowed for 1 1/16" for the glides(1" recomended) I had to build up the sides as much as 1/2".

There not like the old ones

Bought them to replace an old one that got broken wow what a difference id say there about half the material in the new ones. I don't expect them to last 50 years like the old ones.

Easy to use drawer slides

I have used these drawer slides in the past and they are easy to use and very sturdy. I gave them 4 stars as I would like to have more screws included to attach the slide onto the drawer.

Works as advertised

Put 'em on, slide on the drawer, and you got yourself a drawer what goes in & out.

Replacement rails were cheap

I purchased the rails to replace the ones I have. I figured the screw holes would all line up, would be much easier. What I found was that the holes were in different places and the steal was a much thinner. I had to use additional screws to hold the top of the rails (where the wheels are) in place because they bent under the weight of the drawer. They did the job, but not much more.

Replace drawer slides

I took my old broken drawer slide to measure and replaced it with a similar 22" length. After installation I discovered a 2-3 inch extension that actually makes the drawer pull out further than my other drawers with the former old slides to make items in the rear of the drawer more accessible.