Ratings & Reviews for RELIABILT 1-in Schedule 40 PVC Compression Coupling

Great repair solution

Used to repair a damaged irrigation line that was 18" below the surface, was easy to do made the task much easier/simpler.

Works great

I Don't work on PVC very much so this is quick and easy to use. Also don't have to spend more money for glue that will go bad sitting in my shed.

Worked as required

Broke a main water pipe in my sprinkler system while planting flowers. This coupler plus another of a different type and an eight inch piece of pipe fixed the problem. All connections using only my bare hands were made water tight. Would have given this a 5 star rating if various sizes up to 24 inches were available.

Good Product

Extremely easy to use, makes the connection quickly and securely

Great!

I had to fix a pipe that was broken and this coupling did an amazing job.

very easy to use for applications that you need to disconnect .

Easy fix for a leaky pipe!

We had a blow-out in one of our irrigation pipes and used this to fix the problem. We cut a small section out and replaced it with this short coupling. It was easier than using glue and tape with another piece of pipe. It sealed perfectly and was a 2-minute job.

Great for the job as a quick disconnect

Building a low pressure sand filter and bog filter for my son's fish pond. We wanted to be able to disconnect some of the components but using unions was going to cost too much. The coupling was the perfect answer. It goes on and off quickly and easily and allows us to change the angle of the piping as necessary. I'll use these for my future low-pressure projects.

wrong size

The product was in the incorrect bin and I did not double check the size. returned product for correct one.

Worked as expected

Used to repair irrigation system pipe. Worked in my situation. Sealed well at both ends.

A real time saver

The repair coupling makes it possible to fix broken PVC without bending the pipe to make room for the fitting. This means you can dig a smaller hole and put less wear and tear on the plastic pipe.

solved my problem

Saved me a lot of digging by joining 2 pipe ends after I cut out a failed coupling. Even though the pipe ends weren't exactly aligned, it joined them & held pressure.