Ratings & Reviews for Mount-It! MI-319L Full motion Indoor Wall TV mount Fits TVs up to 70-in ( Hardware Included )

Solid mount holding up my precious plasma.

This thing is a beast. It is currently holding up my 65\ plasma without any problems

Great product.

This holds our 55\ LG TV perfectly. It took two men to mount it

Tv bracket works great for 70 incher

Product works great. Mounted a 70\ tv from this bracket with no trouble and by myself. Easy instal

It appears very solid, but still bends. The ...

It appears very solid, but still bends.The mounts are a little limited in how to connect to studs (need to center on two studs).If you try and move where you connect the mount to the TV to center on the wall, the TV weight (60\ LED) causes the mount to bend slightly. The amount of bend varies based on how far you pull the mount from the wall.It would be too much effort to return

Check Level.. then Check Level again

Make sure it is mounted into the studs. Make sure it is mounted into the studs.The wall mount goes on as expected, but the wall mount and the TV arm of the operation do not necessarily agree.I put the wall mount into studs, level. Then when I put the TV on I realized this fool was DROOPINGI mounted the TV onto the braces to compensate... meaning I put the TV mounts \up\" one to make up for the droop

Excellent for my 70\ Vizio"

My house was built in 2004 so it has a TV nook that is entirely too deep. I framed some studs into the nook and mounted my 70\ Vizio P-Series to it (without the dry wall as the TV pretty much hides everything). It holds well and leveling is easy

This is a perfect fit for my a corner mount

This is a perfect fit for my a corner mount. Lot of adjustability forward and to the side. Extremely heave duty with no sag.

Easy installation just find 6 studs and its heavy duty

Easy installation just find 6 studs and its heavy duty. Installed a 65in tv just under 50lbs and soundbar but this is rated for over 200lbs. The lag bolts are long so make sure they won't go to the other room. The instructions are not good at all.

Great price slow shipping but great defintly worth the extra ...

Only 20" pull out I could find with full tilt. Great price slow shipping but great defintly worth the extra money. Mounted a 65inch vizio

Great TV Mount!

Amazing product! Holds my 65\ curved Samsung perfectly! Only negative thing is I had to cut the spacers in half as they were too long for the bolt to have an adequate hold. However

Excellent, high quality, great price.

We love these at the office. We've installed 2 70\ tvs in one room for audiences to view and then another 65\" in a board room for meetings. They are sturdy

Installation was easy. The tv had a multitude of positions

I purchased this corner tv mount originally for my older 65\ LG plasma tv. It worked well. Installation was easy. The tv had a multitude of positions

Awesome! We have a 10 year old heavy flat ...

Awesome! We have a 10 year old heavy flat screen and this stand is built tough and worked perfect! Great product!

Very heavy duty. No play in all the positions ...

Very heavy duty . No play in all the positions. Some of the other ones I had looked at had a lot of movement. Will definitely get another one for tv in basement when TV room is finished.

Great mount. Due to the way the builder of ...

Great mount. Due to the way the builder of my house put the coax and electrical outlets on the wall I had to hook the TV way to the right of this mount instead of having it centered and the mount holds just fine with no sag or anything like that. This is a real heavy duty mount

I like it!!

I had a unique situation to resolve, my TV niche was 23 1/2\ deep and I didn't want to buy a flat screen that would fit in it's 40\" width. This mount was the only one that would allow me to mount my 55\" outside the opening - worked perfectly. Short of the unit being a bit on the heavy side (which is to be expected with a unit that will support very large flat screens)

Really Cheap Hardware (bolts), Narrow wall plate.

The good, its pretty sturdy for a single arm swing out mount.The not so good:1) very light weight screws, snapped one of the lag bolts.2) lag bolts: 12mm socket didn't fit them, neither did a 13mm socket. 1/2 inch socket fit best.3) Instructions call for a MINIMUM of 16 inch spacing between bolts. The widest spacing allowed by the mounting plate is 16 inches. So the minimum became a maximum. I had to drill mine to accommodate 18 inch spacing (old house). 24 inch spacing is not that rare, if your...