Ratings & Reviews for Krylon Fusion All-In-One Gloss Navy Modified alkyd Spray paint and primer in one ( NET WT. 12-oz ) 6 -Pack

Horrible Nozzle

This was not cheap spray paint. The nozzle does not work and keeps POPPING OFF??? I can’t even get the product out because they cut corners on the hardware. What a train wreck.

Extremely hot paint

Ive been painting for 30 years on and off. Bicycles, woodworking. Cars, appliances, furnace and models, you name it, Ive painted it. I had this small Abs plastic boat and I was familiar with the fusion for plastic. I don’t know if this is the same formula. I gave this boat hull a light scuff and sprayed 2 coats 15 minutes apart. This paint goes on extremely heavy and It is difficult to get a light coat. It also behaves like enamel which I do not like based on drying times. The solvent in this pa...

Worst Spray Paint Ever!

I am an experienced painter. This KrylonFusion All-in-One is absolutely the worst spray paint I have ever used. It bubbles, drips and does not adhere to the prepped and sanded surface. I am trying to refinish a childs kitchen for my granddaughter. I sprayed the first coat. waited over 48 hours even though the can states recoat before 6 hours or after 24 hours. The second coat ruined the finish. I had to sand and scrape the bubbled finish., wait another 48 hours and it does the same thing. Six ca...

Great paint - lousy cap and nozzle

I give the paint itself a 5-star rating for easy, great looking results. I give the cap & nozzle a 1-star. The cap was a bugger to get off which led quickly to the nozzle on both cans, breaking off at the stem where it enters the can. Used a 'Hammered Black' and 'Hammered Gold on a metal electronics enclosure, for a vintage patina look. Applied well using steady, light repetitive building coats with 15 minutes between coats, until the proper texture was achieved (which was fairly thick). ...

Worst spray paint I've ever used

Like the title says, this is the worst spray paint I've ever used. I only bought it because the store was out of the stuff I normally buy, and I'll never buy it again. It doesn't stick to what you're trying to spray. I'm an experienced woodworker, and after priming and sanding thoroughly, the paint wouldn't stick. I let it dry for over s week, sanded again, and sprayed again but the paint still isn't sticking properly. Absolutely garbage, completely ruined my project. Never again.

Not what I expected

1st can stopped spaying just as I started project. Could not get paint to stick to the plastic trim around my boats glove box plastic was thoroughly cleaned. I understand polyurethane is a hard surface to paint so, I gave it another try on an aluminum hatch trim. It spattered on the first attempt. On second attempt I got a reasonably clean spray. I’m letting it set for a couple of days before giving it the scratch test. Wish me luck

Really difficult to remove cap.

The cap was very difficult to remove. It took so much force that I wound up breaking off the spray nozzle rendering the product useless.

Total failure of a product.

1st issue was when shaking can, paint droplets started flying all over. It was leaking between the spray nozzle and the part that it attaches to. Wipe off paint can and started spraying and started dripping big drops on work piece. Couldn't push nozzle down any further. 2nd it says it dries quick to the touch. But after 24 hours could scratch the paint with my finger. Not finger nail, my finger. Bought another can thinking I could have got a defective can. Nope, did the exact same as the 1st...

Not good for all Ready to Assemble furniture

Taking the lazy and less costly route, I bought the Krylon Fusion to paint a laminate ready to assemble book case. The first coat bubbled and pulled away leaving large areas of the laminate color showing through. I have spray painted many projects so i know I applied the paint correctly. I waited an hour and tried a second coat, the finish is still very uneven with the original color still showing through in patches. Very disappointing.

Unsatisfied

Very disappointed in this product. Purchased 4 cans. Cap is not easy to get off. Actually broke the sprayer button underneath off, when trying to remove cap. This can was now not useable. You claim, “no runs, drips or errors. I experienced both runs and drips. I will say, it does dry quick. See photos.

Great Coverage

[This review was collected as part of a promotion.] Krylon Fusion All-In-One provided one coat coverage with both primer and paint for an easy paint job painting a couple of outside chairs that needed to be brought to life. They were just prepped by wiping down and then drying them. The paint was not sticky feeling like some paints tend to be. Big spray nozzle provided easy coverage and no drips by spraying at recommended distance on can.

Covers nothing - and drips

I used to this to paint a small filing cabinet. I sanded it, cleaned it, and started painting. It barely covered anything. And it didn't even come out of the bottle consistently. Sometimes it was just air. I shook it VERY well, and shook it in between painting. I used the whole can and it didn't even make it to two coats. I can still see underneath the paint. The Clamshell Matte color is more like an uneven warm grey. I would NEVER buy this again. I read similar reviews only after I'd alread...

Inconsistent Results

I’ve used this product previously with good results on exterior vinyl and aluminum surfaces, but I’ve gone through three cans of “Antique Grey” gloss and it refuses to provide an even finish, about 75% smooth gloss and 25% matte. Attempted to reapply after 24hrs and they aren’t kidding when they say wait 48hrs to apply additional coats (see photo). It cracked several spots on the prior coat. Stripped the whole piece and started with new cans from a different store and got the exact same resul...

Works well

[This review was collected as part of a promotion.] My daughter and I found the Krylon paint fun and it works really well. It works better than other brands that we have tried. It also comes in many different shades and colors. It was a hard decision to make.

good for every job!

[This review was collected as part of a promotion.] This Fushion All-In-One by Krylon is my new go-to! We have used it on just about everything! Outdoor chairs, pieces of wood furniture, Holiday projects, lamps and so much more! The can is easy to spray, no drips or mess. I didn't need a ton of coats with the primer already built in. Goes on even and dries fast! Highly recommend for your next project!

Awful

Color didn’t even come close to cap color. Matte clamshell looks like primer gray. Now my furniture in the back yard looks like a primered car. Going to try to go back over it in a few days with a darker color to see if it fixes it, otherwise I’ll use brownell’s paint for my rifles and have FDE furniture. Photo was taken after 4 coats on pine. Ended up the same color on the plastic and metal of chairs as well so it’s not the material type.

Fast drying Matte Paint is great but it’s differen

Been a Krylon devoted since design school and working over 40 years. I had a cloth at requested matte paint. Just takes some getting used to. I tend to be a close to the piece fast painter but the matte takes following the recommendation of 8”-10” away. On wood (poplar) I typically need to sand the first coat but end product is good. Also just because it feels dry but I wait to assemble for at least a day or two.

Great finish!

[This review was collected as part of a promotion.] I have always had the best luck with Krylon spray paint. Yes, I have used others without always getting the same spray quality. Krylon routinely produces a very nice spray pattern. They also have a great selection of colors.

Easy to use

[This review was collected as part of a promotion.] I recently received the Fusion All-In-One® spray paint to try and review. I got this paint to give my outdoor table a much needed facelift. So easy to apply,no sanding needed and full coverage! I will definitely use this paint for more projects in the future.

Restored plastic chairs like new!!!

[This review was collected as part of a promotion.] The Krylon Fusion "Black Satin" adhered and covered very well to my two plastic outdoor chairs. I used 3 light coats and the satin finish is absolutely beautiful. They look brand new. Will definitely use again on my next project. Totally pleased.