Ratings & Reviews for Krylon Fusion All-In-One Gloss Navy Modified alkyd Spray paint and primer in one ( NET WT. 12-oz ) 6 -Pack

Hunter Green is a bright green.

The Hunter Green does not match the lid. It is more a bright green. Tried it in gloss and satin. Similar sheen and both bright green.

Dont Buy. Paint result is horrible!

I purchased three cans of Satin White to paint a hobby rack. The paint instantly crackled as soon as i sprayed it on the pieces. Now I have to sand every piece down and find paint to use on this. I have used krylon many times in the past but this stuff is horrible!!!!! I followed all the directions on the can for humidity and temp and ended up with a headache!!

Very disappointed!

Bought 2 cans of of Gloss Popsicle Orange Fusion 5x at 2 different stores. Coverage was very poor , constant runs. Have used Fusion for years on shutters and other projects. You need to go back to opaque colors , satin finish, gloss colors are very disappointing. I have 12 cans of Hunter Green to redo my shutters, satin no longer available, only gloss. Hope I don't ruin my shutters as this orange project has been a disaster!

Cover cap is too hard to remove

Krylon Fusion is by far my favorite spray paint but the tops are the most difficult to get off of any spray paint that I have ever used. I should not have to take it back to the store to have the cap removed when even men who live close by cannot remove the cap.

Leaves residue messy

Bought black matte today. I shook it week but it didn’t cover even and left a powdery residue on pegboard and one overspray area husband said never saw such a thing. It’s a mess now. Terrible paint

3rd or 4th time using

I have used this paint for the last 3 or 4 projects. In my case I have used it for repainting golf carts. I've used the satin, flat and gloss. The coverage is great and the adhesion is even better. Holds up good as well. I normally do light sanding unless I am have to use filler. The only complaint I have is the spray pattern is more narrow then I would prefer. A nozzle that would allow different patterns would earn that last star.

Angry customer

I have some of the green can satin black Fusion and I ran out and apparently they don't make that anymore so I bought some of this all-in-one stuff and it is horrible! And this new stuff is poipy this new stuff ruined my gauge cluster for the 70 Mustang project.

Great color

[This review was collected as part of a promotion.] Easy to wooly, dries fast and looks great. Most definitely recommend!

Should be called Anti Fusion

Its so bad it wont even stick to itself. Paint just runs and wont stick to anything.

WASTE OF MONEY AND TIME

absolutely terrible paint 5 coats and still will not completely cover white.

Horrible

Horrible. Super spotty application. Runs like a sprinter in the olympics, like water with some dye in it. For someone that uses a lot of spray paint for work, never again will Krylon be purchased.

Horrible paint!

Horrible paint! Runs, thin takes 4 coats to match lid color! My husband painted cars for years. He knows what he’s doing. After sanding and preparing the farm gate, he started to apply the paint. Terrible! TERRIBLE!!!

Covers great

[This review was collected as part of a promotion.] Way better than rustol.... this stuff covered surfaces not advertised. Couldn't be happier. My new go to paint

Perfect paint

[This review was collected as part of a promotion.] I purchased a few cans last week to paint my models for my train set worked great. The colors really bring out the features in the models.

Good product -dry times temp & humidity sensitive

Overall I’ve been satisfied with this paint. Have used to gloss black for refinishing frame and roof supports on my golf cart build. Also used the satin on plastic trim and bumpers. Product is sensitive to humidity and Temperature. Expect long dry times in cold and damp ambient conditions. No too bad on hot dry days. I tried putting a clear protective coat on some parts after and had the parts all craze up. Had to do a lot of sanding to get back to a point of refinishing again. Not sure if t...

Does not dry!

I purchased for a pinewood derby car my son and I were working on. We painted it in with 2 light coats to get a nice even coverage and 12 hours later the paint is still tacky. We waited another 12 hours and we still have handling marks in the finish. This paint is complete garbage.

Krylon Fusion spray paint

Bought a can and the nozzle was clogged and paint dripped out. Bought a second can and it took quite an effort to get it going then it came out full force. A third can was same - needed to reposition my thumb to force it out.

Disappointing - Last can I ever buy

I've worked with regular Krylon before with good results on metal and wood. This time, I needed to spray paint two small enclosures made from cut and bonded 1/4" acrylic sheet. I decided to buy the (black gloss) Fusion variant even though it's more expensive than the regular type because it's advertised as suitable for "difficult surfaces such as plastics". Painting the first box went well although the paint went on thin and unevenly plus it runs very easily if you apply even just a little too ...

Goes on smooth, and each cam matched very well

I painted my truck using a spray can, the results speak for themselves.

Not as good as the original Fusion paint

Used up my last can of the original formula Fusion paint (great stuff, should have purchased more while available). purchased this newer formula Fusion all in one, but nowhere near as good as original, slower drying and more runs.