Ratings & Reviews for Kreg Rip-Cut Cutting Jig - Make Precise Rip Cuts and Crosscuts up to 24 Inches Wide

Straight cuts

As long as you have a straight edge to key off of, you can make straight cuts on a sheet.

Kreg Rip-Cut

This tool is extremely useful for cutting down sheets of plywood if you don’t have a table saw. It is east to adjust and replicate exact cuts each time.

Moves too easily

With the way this is setup you can’t clamp down your wood so it’s hard to get a straight cut as advertised

Kreg Rip Cut

Works great and very helpful when cutting plywood alone.

Rip-Cut

Works well and priced reasonably.

Perfect cut!

Kreg products continue to impress. The cuts are clean. If setup properly the product is flawless. Would not be uncommon to setup the rip cut so the blade guard cannot spring return. This is a setup issue not a manufacturing issue. Great product, highly recommended

Had to Return

The plastic guide that rides along the edge of the wood is fastened with a plastic pin and 2 screws. Beyond 6 inches of cut that plastic guide begins to flex creating a poor cut (not square). I would have spent more on this product if it where all aluminum. Would not recommend!

Rip saw

Works good as long as your guide edge is straight of course. I needed it for a project I was doing and didn’t have a helper. Had to cut full sheeted of mdf by myself and this worked great

It works great

I recently used this jig in breaking down some 4x8 sheets of plywood, it made the job easy and simply put did a great job. I have absolutely nothing negative to say about this product and recommend it to anyone that wants something simple and affordable to break down sheet goods, you can keep the expensive track systems by dewault,makita,festool and the others they are simply too expensive and this alternative is excellent.

Kreg rip cut jig

The jig allows you to rip straight even cuts right off a full 4*8 sheet of plywood effortlessly.

works great

Bought this at the same time as the accu cut. Works great and will recommend to everyone!

Inaccurate description!

Said it works with a right motor saw, like my worm drive saws, but it doesn’t! Complete waste of time.

Not great for 23 1/2 cuts

I was needing something that would be quick for me to cut 4x8 sheets of 3/4 plywood into almost 24” strips. This is way to wobbly to go that wide. It’s also plastic and it will move. I returned it and just clamped a level as a guide. Not worth it for wide cuts. Probably ok for smaller ones

Kreg Rip-cut

Definately got the job done!

It’s very helpful

We bought a trailer full of 2x6 and hand to cut all of them in half. This product had a lot of overtime hours and worked great each time.