Ratings & Reviews for Grizzly 2 HP Canister Dust Collector w/Aluminum Impeller Dry Dust Collector with Polyester Filter

Great product. I have installed in my shop along with a Grizzly cyclone attached to a 30ft manifold

Really impressed with this product. Louis a strong vacuum through my 30 foot dust collection manifold with multiple gates open.

we use in industrial application --- it helps to keep dust and debris off parts

Great Dust Collector!

Shipped out to me the next day and arrived in perfect condition. Went together in about an hour with no issues whatsoever. Very powerful dust collector. I highly recommend this for any small shop.

this is my second grizzly collector. My first only had .3 inches w.c. suction and I was not totally impressed. This one can double as a vacuum cleaner, plenty of suction. Be careful not to suck up pieces of wood as all debris goes thru the impeller and I now have a dent in mine where i ran a small wood knot thru it. Only one small issue is that their are leaks on the sweep coming off the blower. A bit of silicone will cure them but I wanted the finer filter to really limit the dust and it doesn'...

Powerhouse

This dust collector operates as advertised. I have it connected to my 20 planner and the saw dust left on the planer bed is minuscule. The canister filters everything leaving my shop extremely clean!

Very nice unit!!

This was very easy to put together other then 2 of the threaded holes were not clean i had to run a tap in the holes to get bolts to start!!! But nice and powerful!!!

Great sucktion

Bought this to replace a 1hp general. This not only handles the equipment but has enough to act as a air filtration. So happy we went with Grizzly Tools.

Plenty of Power

Really impressed with the amount of power this 2HP unit provides. Only came with one inlet cover yet provides a 3 prong adapter? Been running it for about a two month and very pleased with the results. Great addition to my Grizzly workshop.

Replacing a 2 year old, broken, off brand, cheaper dust collector with no warranty, this is the one I should have purchased the first time.

Products fine - no lift gate as was paid for.

The dust collector is just as expected and works fine. The lift gate I paid for was not provided by the shipping company making that expense a waste just as the outboard motor I received that week from another company with a different shipper. Both drivers showed up, looked confused when the lift gate words on the shipping order were pointed out, and then said we could probably manage it rather than waiting another week for it to come back on another trailer.

Great Value

After a month of using this, I find it to be all that I had hoped for. The product came packed very well and the assembly was quite easy. It makes a lot of noise when in operation, but I think that all dust collectors do the same. Im very happy with this purchase.

I have made it the centerpiece of my workshop. It works great.

I made the decision to replace my old grizzly vac,It had given me many years of great service. I placed the order on line and with in a few days they were dropping my new vac in my driveway. Great service and great prices. Thank you.

Plenty of power for multiple pieces of equipment

This dust collector has plenty of power to have multiple devices at the same time, and not have any issues with suction. I actually leave one of the other blast gates partially open if I'm only using one device since it has so much suction power. The box was damaged upon arrival, but the packaging was sufficient to protect the equipment pieces inside, so there was no damage to the unit.

Great Dust Collector

Received dust collector in mid-February. There was no shipping damage and the DC was straight-forward to assemble and setup. I ran a dedicated 240V, 15A circuit for the DC and connected 1 port of the DC directly to the table saw using 4 flexible hose and a blast gate. Another 4 hose and BG allows connection either to the band saw or miter saw. Noise level is high, but about what I expected. Im very satisfied with the DC.